UV LED LAMP VAOL-5GUV0T4 Feature Package Dimension Low Power Consumption I.C. compatible Applications Disinfection and Sterilization Adhesive Curing Leak Detection Authentication Description inch 0.01 These LEDs are Based on InGaN Tolerance Unit mm 0.25 Material Technology Emitted color: Purple (UV) Water Transparent Lens CAUTION : EMITS ULTRAVIOLET RADIATION This UV (ultraviolet) LED during operation radiates intense U V light. Do Not look directly into the UV light during operation of device. This can be harmful to the human body especially to the eyes and skin, even for brief period due to the intense UV light. If viewing the UV light is necessary, please use UV ltered glasses to avoid damage by the UV light. UV If the UV LED in your product might be viewed directly, please afx a caution label to your product to that effect. Avoid direct eye and skin exposure to the UV light. Keep reach out of children. Absolute Maximum Ratings at Ta=25C Symbol Parameter Max. Unit PD Power Dissipation 120 mW VR Reverse Voltage 5 V IAF Average Forward Current 30 mA IPF Peak Forward CurrentDuty 0.11kHz 100 mA Derating Linear Form 25C 0.4 mA/C C Topr Operating Temperature Range 20 to 80 C Tstg Storage Temperature Range 20 to 100 Lead Soldering Temperature 1.6mm 0.063inch From Body 260C For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta=25C Symbol Parameter Test Condition Min. Typ. Max. Unit VF Forward Voltage 2.8 3.0 3.6 V IF 20 mA IR VR 5 V 50 A Reverse Current -- -- IF 20 mA 30 Half Intensity Angle Deg. IV Luminous Intensity IF 20 mA -- 160 -- mcd. IF 20 mA Peak Wavele ngth 400 405 -- nm p Electrical Characteristics at Ta25 Symbol Iv VF p Parameter Luminous Intensity Forward Voltage Peak Wavelength Condition IF20mA IF20mA IF20mA Unit mcd V nm Grade Range Grade Range Grade Range BIN10 125~175 P0 2.8~3.0 U6 400~405 BIN11 175~245 P1 3.0~3.2 U7 405~410 Binning P2 3.2~3.4 P3 3.4~3.6 Intensity: Tolerance of minimum and maximum = 15% Vf: Tolerance of minimum and maximum = 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. Radiation Diagram IF=20 mA 50% Power Angle Angle =30