MLV0402E3 www.vishay.com Vishay BCcomponents SMD 0402 Multilayer Varistor FEATURES Surface mount multilayer surge suppressor Inherent bidirectional clamping Excellent energy/volume ratio Suitable for reflow soldering Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Over-voltage and transient voltage protection: QUICK REFERENCE DATA Data lines and I/O port protection Protection against ESD transients PARAMETER VALUE UNIT On-board protection of ICs and transistors Maximum continuous voltage DC 5.6 to 18.0 V Modem protection AC 4.0 to 14.0 V LCD protection Maximum clamping voltage 15.5 to 40 V at 1 A DESCRIPTION Capacitance range Size 0402 (1005M) multilayer chip varistor with NiSn 90 to 360 pF (at 1 MHz) terminations. Maximum energy (10/1000 s) 0.05 J Maximum peak current 20 A PACKAGING Operating temperature range -55 to 125 C Available in 8 mm paper tape, component pitch 4 mm on Weight 0.0015 g 180 mm reels containing 10 000 pieces. ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM BREAKDOWN TYPICAL WORKING VOLTAGE CLAMPING PART NUMBER VOLTAGE CAPACITANCE VOLTAGE V V V V CSAP RMS DC b C V V V V pF MLV0402E3 < 10 A 1 mA 1 A, 8/20 s 1 MHz 4.0 5.6 7.1 to 9.3 15.5 360 0403T 7.0 9.0 11.0 to 14.0 20.0 230 0703T 11.0 14.0 16.0 to 20.0 30.0 120 1103T 14.0 18.0 23.0 to 28.0 40.0 90 1403T Notes Sinusoidal voltage assumed as normal operating condition. If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection. Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1. Parts are not recommended for automotive applications. Revision: 22-Apr-15 Document Number: 29107 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000MLV0402E3 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters L WT L and L 1 2 3 1.0 0.1 0.5 0.1 0.6 max. 0.25 0.15 T W L L L 2 4 3 L 1 RECOMMENDED FOOTPRINT in millimeters C AB C 0.7 0.7 2.0 A B V/I CHARACTERISTICS Max. clamping voltage Max. leakage current 100 014 011 007 004 10 1 0.00001 0.0001 0.001 0.01 0.1 1 10 100 CURRENT (A) Revision: 22-Apr-15 Document Number: 29107 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VOLTAGE (V)