159 PUL-SI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In FEATURES Useful life: 5000 h at 105 C Available up to 500 V Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, very small dimensions, cylindrical aluminum case, insulated with a blue sleeve Low ESR, high ripple current capability Keyed polarity snap-in version available High reliability Material categorization: for definitions of compliance 059 159 157 miniaturized 85 C PLL-SI PUM-SI please see www.vishay.com/doc 99912 PUL-SI Fig. 1 APPLICATIONS Solar PV inverters General purpose, industrial and audio / video systems Smoothing and filtering QUICK REFERENCE DATA Standard and switched mode power supplies DESCRIPTION VALUE Energy storage in pulse systems Nominal case size 22 x 25 to 35 x 60 ( D x L in mm) MARKING Rated capacitance range 56 F to 1800 F (E6 / E12 series), C The capacitors are marked (where possible) with the R following information: Tolerance on C 20 % R Rated capacitance (in F) Rated voltage range, U 200 V to 500 V R Tolerance code on rated capacitance, code letter in Category temperature range -25 C to +105 C accordance with IEC 60062 (M for 20 %) Endurance test at 105 C 2000 h Rated voltage (in V) Load life at 105 C 2000 h Date code (YYMM or in 2 digits according to IEC 60062) Useful life at 105 C 5000 h Name of manufacturer Useful life at 40 C and 500 000 h 1.6 x I applied Code for factory of origin R Shelf life at 0 V, 105 C 1000 h - sign to identify the negative terminal, visible from the Based on sectional specification IEC 60384-4 / EN 130300 top and side of the capacitor Code number, last 8 digits 159 xxxxx Climatic category IEC 60068 25 / 105 / 56 Climatic category in accordance with IEC 60068 SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES ( D x L in mm) R R U (V) C R R (F) 200 250 400 450 500 56 - - - 22 x 25 22 x 30 - - 22 x 25 22 x 30 22 x 35 68 - - - 25 x 25 25 x 30 - - 22 x 30 22 x 35 22 x 35 82 - - 25 x 25 - 25 x 30 - - 22 x 35 22 x 40 22 x 40 100 - - 25 x 30 25 x 30 25 x 35 - - - 30 x 25 - - - 22 x 35 - 25 x 40 120 - - 25 x 30 25 x 35 30 x 30 - - 30 x 25 - - - - 22 x 40 25 x 40 25 x 45 150 - - 25 x 35 30 x 30 30 x 35 - - 30 x 30 35 x 25 - - - 25 x 40 25 x 45 25 x 50 180 - - 30 x 30 30 x 35 30 x 40 - - 35 x 25 - 35 x 30 - 22 x 30 25 x 45 30 x 40 30 x 45 220 - 25 x 25 30 x 35 35 x 30 35 x 35 - - 35 x 30 - - Revision: 16-May-2018 Document Number: 28341 1 For technical questions, contact: aluminumcaps2 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 159 PUL-SI www.vishay.com Vishay BCcomponents SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES ( D x L in mm) R R C U (V) R R (F) 200 250 400 450 500 - 22 x 35 25 x 50 30 x 45 30 x 50 270 - 25 x 30 30 x 40 35 x 35 35 x 40 - 30 x 25 35 x 30 - - 22 x 30 22 x 40 30 x 45 30 x 50 35 x 45 330 - 25 x 30 35 x 35 35 x 40 - - 30 x 25 - - - 22 x 35 25 x 35 30 x 50 35 x 45 35 x 55 390 25 x 30 30 x 30 35 x 40 - - 22 x 40 25 x 40 35 x 45 35 x 50 35 x 60 470 30 x 25 30 x 30 - 35 x 40 - - 35 x 25 - - - - 25 x 45 - 35 x 60 - 560 25 x 35 30 x 35 - - - 30 x 30 35 x 30 - - - 25 x 45 30 x 40 35 x 60 - - 680 30 x 30 35 x 35 - - - 35 x 25 - - - - 25 x 50 30 x 45 - - - 820 30 x 35 35 x 35 - - - 35 x 30 35 x 40 - - - 30 x 45 35 x 40 - - - 1000 35 x 35 35 x 45 - - - 30 x 50 35 x 45 - - - 1200 35 x 35 35 x 50 - - - 1500 35 x 45 - - - - 1800 35 x 50 - - - - DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN D + Terminal L + 2 max. L 10 0.1 - Terminal Bottom view + 0 5.8 mm - 1 2 0.1 (2 x) The minus terminal can be marked with a black dot or with an imprinted - sign. Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram THREE TERMINAL SNAP-IN D 2 0.1 (2 x) 2.5 0.1 + Terminal L L + 2 max. The 10 mm spacing of the 2 pin - Terminal snap-in is used as the base layout Minus pole and a third hole is added. 10 0.1 marking The third hole is closer to the 3.3 0.1 4 0.5 negative primary hole so that Bottom view polarization is always maintained, together with added mechanical The negative terminal has TWO pins which are BOTH stability. 4.75 0.1 electrically connected Fig. 5 - Mounting hole diagram Fig. 4 - Three terminal snap-in Revision: 16-May-2018 Document Number: 28341 2 For technical questions, contact: aluminumcaps2 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000