TCS40DLR TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TCS40DLR Digital Output Magnetic Sensor Feature Open-Drain Output South-Pole and North-Pole Detections SON3-P-0203-1.90S SOT-23F Weight: 11.0 mg (typ.) Marking Pin Assignment Function Table (Top View) GND Magnetic Flux Output 3 Density B L ON LA8 B Z (Note 2) OFF 1 2 V V (Note1) OUT CC Note 1: A 0.47 F capacitor should be connected near the device. This condition will not guarantee successful operation. Check the performance thorough evaluation using the actual application to set the condition. Note 2: In high impedance state. Start of commercial production 2015-05 1 2015-04-03 TCS40DLR Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Supply Voltage V 0.5 to 6.0 V CC Output Voltage V 0.5 to 6.0 V OUT Output Diode Current I 10 mA OK Output Current I 5 mA OUT Vcc/GND Current I 10 mA CC Power Dissipation P 1 (Note 3) W D Storage Temperature Range T 65 to 150 C stg Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 3: Mounted on a FR4 board. 2 (25.4 mm 25.4 mm 1.6 mm, Cu Pad: 645 mm ) Operating Ranges Characteristics Symbol Rating Unit Supply Voltage V 2.3 to 5.5 V CC Output Voltage V 0 to 5.5 (Note 4) V OUT Output Current I 1.0 mA OL Operating Temperature T 40 to 85 C opr Note 4: V = 0 V or when output impedance is high. CC 2 2015-04-03