T3SP-D4MX-BUNDLE

T3SP-D4MX-BUNDLE Data Sheet Differential High-Frequency DP4T/2:8 Multiplexer Phased Matched RF Multiplexer includes mated cable set for accurate measurements Front panel of the T3SP-D4MX Affordable Tools for Precision Debugging DP4T/2:8 High Frequency Multiplexer Versatile RF switch for differential and single-ended applications Differential (100 ) or single-ended (50 ) Phase matched differential channels and high isolation between CH1/2 Frequency Bandwidth from DC up to 10 GHz High-performance RF specs for Return Loss and Insertion Loss Instant multi-pairs cable and connector testing Detect even on your premium cables any with TDR Verify the quality of your cables and imperfection that might be the root cause of connectors. measurement artifacts Internal ESD protection, 1 billion switching cycle Ideal to be used combined with TDR for impedance pro le measurements SW programming interface included Simple graphical SW tool ideal for testing purpose USB controlled and powered, small form factor Easy to use, measure and analyze everywhere you go without an AC power Typical Applications TDR and VNA Multiplexing for stimulus-response Measurements TDR/VNA or Automatic multi-pairs cable testing system T3SP-D4MX RF Source High-Speed serial data stream switching RF signal switching and testing PC/LaptopSPECIFICATIONS Simpli ed functional diagram showing input ports CH1 and CH2 to the left and the blocks of four output ports for each input port. Alternatively, the input can be set to an unconnected state. RF Characteristics (single-ended) RF Characteristics (Differential*) Insertion Loss (typ.) < 0.4 dB DC to 0.3 GHz Isolation between > 60 dB DC to 010 GHz CH1 and CH2 (typ.) < 1 dB 0.3 GHz to 2 GHz Group delay deviation 5 ps DC to 010 GHz < 3 dB 2 GHz to 8 GHz CH1 and CH2 (typ.) < 5 dB 8 GHz to 10 GHz * measured between same path (A, B, C, D) of CH1 and CH2 Return Loss > 25 dB DC to 0.3 GHz (CH1 and CH2 input, typ.) > 18 dB 0.3 GHz to 2 GHz > 15 dB 2 GHz to 8 GHz > 10 dB 8 GHz to 10 GHz Isolation > 45 dB DC to 0.3 GHz (contacts same channel, typ.) > 32 dB 0.3 GHz to 2 GHz > 27 dB 2 GHz to 10 GHz Typical RF-Performance Plots Return loss (RL) of CH1 and CH2-input (S11) when Insertion loss (IL) between CH1 or CH2-input and, routed to 50 -terminated output respectively respectively, CH1<X> or CH2<X> output ports. CH1<X> port and CH2<X> port (S22). 2