MEAS STATOR RTD Temperature Sensor Variety of Configurations Single and Dual Elements Custom Designs Available with: Specific Dimensions Side Exit Paddle Style High Accuracy Special Cable or Leadwires The Stator RTD Sensor is a rectangular, flat, laminated sensors commonly called Stator Sticks because they are inserted between the coils in the stator of a motor. These averaging type sensors are used in electric motors and generators for continuous sensing of the temperature and provide for consistent thermal monitoring without false alarms. Many sizes are in stock or we can customize for your application. Our Stator RTD sensors are built to meet the specifications of ANSI C50.10-1990, general requirements for synchronous motors. We can build to your specifications Features Rear Exit, Epoxy Glass Laminated Elements, Single and Dual: Platinum, Copper, Nickel Custom Body Thickness: .030 to .375 Standard: .030, .050, .078, .093, .125 Custom Body Widths: .250 to 2.50 Standard: .260, .305, .344, .455, .500, .625 Leadwire/Cable Options Applications Industrial Electric Motors Generators TESS-ANDO-408-0000052 SENSOR SOLUTIONS /// MEAS STATOR RTD Page 1 REV B MEAS STATOR RTD Temperature Sensor Performance Specifications Dielectric Strength: Class F: 3,000 volts RMS 60 Hz for 1 minute, between leads and external body surface Class H: 2,000 volts RMS 60 Hz for 1 minute, between leads and external body surface Temperature Limits: Class F: 155C (311F) Class H: 180C (356F) RTD Leadwires: Two Wire, Three Wire or Four Wire Standard: Stranded Copper plated wire with PTFE insulation Other leadwire coverings available Dimensions TESS-ANDO-408-0000052 SENSOR SOLUTIONS /// MEAS STATOR RTD Page 2 REV B