H(T)U(F)3500 SERIES Analog Relative Humidity module with Temperature output SPECIFICATIONS Compact plug and play module with no external component required Can operate under 5VDC or 3VDC Relative Humidity and Temperature Analog Output Full interchangeability. No calibration required Can operate under 5VDC or 3VDC Low power consumption Fast response time Based on the new humidity sensor HTU21P, HTU3500 Series are dedicated humidity and temperature plug and play transducer designed for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the modules humidity linear voltage and direct NTC outputs. The HTU3500 Series are designed for high volume and demanding applications where power consumption is critical. Optional PTFE filter/membrane (F) protects HTU3500 Series modules analog humidity modules with temperature output against dust, water immersion as well as against contamination by particles. PTFE filter/membrane preserves a high response time. Several connectors are proposed. 5VDC or 3VDC power supply products are available. HU3500 analog Humidity sensor only can be proposed FEATURES Full interchangeability with no calibration required in standard conditions Instantaneous desaturation after long periods in saturation phase Analog output Demonstrated reliability and long term stability Reliability not affected by repeated condensation HU3500 analog humidity sensor only can be proposed APPLICATIONS Home appliance Medical Printers Humidifier SENSOR SOLUTIONS /// HPC213 2 H(T)U(F)3500 Series 9/2015 Page 1 H(T)U(F)3500 SERIES Analog Relative Humidity module with Temperature output NOMENCLATURE H(T)U(F)3X3Yzzz Connector Type: zzz = PVBM (Samtec connector) = WxxGyy (wiring) with xx: cable length in mm Voltage supply : yy: from 24 to 30 (AWG) Y = 3: Vcc=3VDC = 5: Vcc=5VDC Output Sensor: X = 5 for Analog (voltage output for RH, resistor for Temp) = 8 for Digital, I2C protocol With optional embedded PTFE filter: HTUF3X3Yyyy With optional temperature measurement : HTUF3X3Yyyy PERFORMANCE SPECS MAXIMUM RATINGS Ratings Symbol Value Unit Storage Temperature T -40 to 125 C stg HTU3533 products V 16V V cc dc Supply Voltage (Peak) HTU3535 products Vcc 16V Vdc Humidity Operating Range RH 0 to 100 %RH Temperature Operating Range T -40 to +85 C a HTU3533 products -0.3 to 3.6V V VDD to GND HTU3535 products -16 to 16V V -10 to +10 mA Input current on any pin Peak conditions: less than 10% of the operating time Exposure to absolute maximum rating conditions for extended periods may affect the sensor reliability. SENSOR SOLUTIONS /// HPC213 2 H(T)U(F)3500 Series 9/2015 Page 2