FS19 Force Load Cell SPECIFICATIONS All stainless steel construction Small compression load 350G to 3000G range High sensitivity 20 mV/V Non-linearity +/-1% FS Flex cable for tight space The FS19 load cell, with ranges from 350G to 3000G, uses proven Microfused sensor technology derived from demanding aerospace and automotive applications which employs micro-machined piezoresistive strain gages fused with high temperature glass to a high performance stainless steel force measuring flexure. This sensing technology eliminates age-sensitive organic epoxies used FEATURES in traditional load cell designs, providing excellent long term stability. This high sensitivity strain gage allows the load cell Small size to produce 20 mv/V output with low strains and deflection, High sensitivity thus long endurance in the smallest package. The flexure High overload is precisely machined to produce excellent consistency Low deflection from part to part. Typical applications range from medical Long life devices to appliances and exercise equipment. Low cost APPLICATIONS Infusion Pumps Load Sensing Contact Sensing Weighing Household Appliances SENSOR SOLUTIONS /// FS19 08/2012 Page 1 FS19 Force Load Cell PERFORMANCE SPECIFICATIONS All specifications are at 25C except where indicated. PARAMETER MIN TYP MAX UNITS, NOTES Force Range 350/500/1000/2000/3000 G Excitation Voltage 2 5 10 VDC Sensitivities (FSO) 14 20 26 mV/V, Ratiometric to excitation voltage Non-Linearity -1 1 %FSO Hysteresis -1 1 %FSO Zero Offset -9 +9 mV/V, Ratiometric to excitation voltage Operating Temperature 0 40 C Storage Temperature -40 85 C Humidity 0 95 % RH Safe Load Limit 2x Rated load Insulation 50 Meg ohms at 250 VDC Deflection 0.020 mm at rated load Input Resistance 1.50K 2.15K 2.80K Output resistances 1.50K 2.15K 2.80K Thermal Error Sensitivities -0.05 +0.05 %FSO / C Thermal Error Zeros -0.5 +0.5 %FSO / C Response Time 1 ms ESD 15 KV, 10 discharges qualified per IEC Weight 1.1 gram Weather Proof IP43 SENSOR SOLUTIONS /// FS19 0 8/2020 Page 2