Piezo Haptic Actuator - PowerHap Type 15G Series/Type: PowerHap 15G - Prototypes Ordering code: Z63000Z2910Z 1Z 4 Date: 2017-07-28 Version: 9 Preliminary data Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers Please fill in the table and then change the color towhit. This ensures that the table disappears (invisible) for the customer PDF. Don t change formatting when entering or pasting text in the table and don t add any cell or line in and to it Identification/Classification 1 Piezo Haptic Actuator - PowerHap (header 1 + top left bar): Identification/Classification 2 Type 15G (header 2 + bottom left header bar): Ordering code: (top right header bar) Z63000Z2910Z 1Z 4 Series/Type: (bottom right header bar) PowerHap 15G - Prototypes Preliminary data (optional): Preliminary data Department: PPD PI AE/IE PD Date: 2017-07-28 Version: 9 Preliminary data EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. EPCOS AG is a TDK Group Company. Piezo Haptic Actuator - PowerHap Z63000Z2910Z 1Z 4 Type 15G PowerHap 15G - Prototypes Preliminary data Features Large displacement High acceleration High force Low insertion height Fast response time Integrated sensor functionality Design RoHS-compatible PZT (lead zirconium titanate) ceramic Copper inner electrodes Dimension of ceramic body: 26 x 26 x 1 (mm) Titanium cymbals for displacement amplification Polarized at 120 V Contains SVHC substance 12626-81-2 Electrical ratings Parameter Ratings Rated voltage 0 120 V Operating temperature powered -40 +85 C Operating temperature unpowered -40 +125 C Maximum compressive force on actuator 0 20 N Maximum operation frequency 500 Hz* Maximum voltage gradient 1.2 MV/s *) Operation frequency is limited by self-heating of the device. At 120 V, 500 Hz, square wave conditions, a maximum temperature increase of +30 C is observed. Electrical characteristics Parameter Conditions 25 C Expected value (typ.) Capacitance C 1 kHz, 1 V 3.6 F RMS Dissipation factor tan 1 kHz, 1 V < 0.05 RMS st 1 Resonance frequency 0.5 V RMS 8 kHz Displacement s 120 V, measured at cymbal end-caps 200 m 120 V Loading Energy E = Q U/2 41 mJ Stiffness k 120 V various load stiffness preload 10 N 100 N/mm Acceleration load 20 g, square wave, 120 V 65 g load 100 g, square wave, 120 V 15 g load 500 g, square wave, 120 V 5.0 g General Polarity of the prototypes: + is the larger metallization area. In the preliminary phase, samples are delivered with soldered wires where the red wire is the positive pole PPD PI AE/IE PD 2017-07-28 Please read Cautions and warnings and Page 2 of 8 Important notes at the end of this document.