EVALKITST7580-1

EVALKITST7580-1 ST7580 power line networking system-on-chip demonstration kit Data brief Features Suitable for point-to-multipoint 2-way power line communication (PLC) over AC mains Flexible 2-board architecture: EVALST7580-1, PLC board based on the ST7580 narrow-band FSK/PSK power line networking system-on-chip EVLALTAIR900-M1, wide-range input voltage, 7.5 W power supply board based on the ALTAIR04-900 quasi-resonant current-mode SMPS controller STM32 microcontroller hosted on the EVALST7580-1 board to handle the ST7580 device and build a standalone power line node External access through several interface 2 types: USB, SPI, I C, USART, JTAG Opportunity to save and load data to/from an external -SD card EVALKITST7580-1 Intuitive graphical user interface (GUI) for the Windows environment with fully programmable transceiver parameters Suitable for CENELEC EN50065 and FCC part 15 compliant applications Description Built around the ST7580 power line networking system-on-chip, this demonstration kit embeds all the functions required for a turnkey power line communication network: the PLC node based on the ST7580, the AC power supply (based on the ALTAIR4-900 chip) and the STM32 microcontroller, to either control the system as a standalone application or to connect the EVALKITST7580-1 to an external host. The typical application environment consists of two or more EVALKITST7580-1s connected to the same mains line, each being controlled by a PC running the ST7580 GUI software. February 2012 Doc ID 022818 Rev 1 1/4 For further information contact your local STMicroelectronics sales office. www.st.com 4Block diagram EVALKITST7580-1 1 Block diagram Figure 1. EVALKITST7580-1 functional block diagram EVALKITST7580-1 Power Supply board LINE EVLALTAIR900-M1 AC mains NEUTRAL Power Supply Unit connector 13 V 3.3 V 3.3 V USB. SPI, STM32 I2C, JTAG ST7580 connectors Line coupling Microcontroller Modem -SD card EVALST7580-1 AM10279V1 2/4 Doc ID 022818 Rev 1