CLOUD-ST25TA02KB

CLOUD-ST25TA02KB NFC Forum Type 4 Tag IC demonstration board Data brief Memory Features 256 Byte (2 Kbit) EEPROM with NDEF Ready-to-use printed circuit board with data support ST25TA02KB-P NFC/RFID Tag in 200-year data retention UFDFPN5 ECOPACK 2 package 1 million erase-write cycles endurance 2 19mm single layer inductive antenna, 128-bit password data protection etched on the PCB 20-bit event counter for read or write Contactless interface access with anti-tearing feature TruST25 digital signature Digital pad NFC Forum Type 4 Tag Configurable general purpose output ISO/IEC 14443 Type A (GPO) indicating, for example, RF field 106 kbps data rate detection Internal 50 pF tuning capacitance, enabling design of small inductive antennas Figure 1. CLOUD-ST25TA02KB board (top view) January 2018 DocID031408 Rev 1 1/4 For further information contact your local STMicroelectronics sales office. www.st.comDescription CLOUD-ST25TA02KB 1 Description The CLOUD-ST25TA02KB is a ready-to-use demonstration board intended to evaluate the ST25TA02KB-P device. The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4. The device communicates using the ISO/IEC 14443 Type A protocol, and is fully powered by the RF field. When the GPO output is used, an external reference voltage is required to set the high level voltage of the GPO signal to be directly compatible with the I/O voltage of the MCU or Host, without the need for any level shifter. The GPO signal is active High when asserted, and can be used as a rising edge interrupt. It may be configured through the RF interface for various uses, like indicating Field Detection (by default) to wake-up an MCU, or Host like a Bluetooth or a Wi-Fi chipset. Figure 2. Functional block diagram 9 &* * QWHQQD .% 3 67 7 3 *32 2 966 06 9 2/4 DocID031408 Rev 1