ANT1-M24LR16E

ANT1-M24LR16E 45 mm x 75 mm antenna reference board for the M24LR16E-R Dual Interface EEPROM Data brief Features Ready-to-use printed circuit board (PCB) including 45 mm x 75 mm 13.56 MHz inductive antenna etched on the PCB M24LR16E-R Dual Interface EEPROM 2 I C connector Energy harvesting output (V ) with a OUT 10 nF capacitance filtering circuit RF WIP/BUSY output with 20 k pull-up performance and capabilities, and to get started resistor, to indicate that an RF operation is with their design. ongoing To demonstrate the energy harvesting function, Description the ANT1-M24LR16E can be used in conjunction with ST DEMO-CR95HF-A demonstration board. The ANT1-M24LR16E antenna reference board is The application can be powered directly from the a ready-to-use PCB that features an M24LR16E- M24LR16E-R V pin. OUT R Dual Interface EEPROM IC connected to a 45 mm x 75 mm 13.56 MHz etched RF antenna The ANT1-M24LR16E Gerber files can be 2 on one side, and to an I C bus on the other side. downloaded from Associated firmware and PC software ANT1-M24LR16E Associated firmware and PC software The ANT1-M24LR16E board is supported by a PC software, the Dual Interface EEPROM tool software, that allows to configure and control the energy harvesting. This software is available from