GP2A25J0000F Series Detecting Distance : 1 to 9mm GP2A25J0000F *OPIC Output, Re ective Photointerrupter with Series Connector Description Agency approvals/Compliance GP2A25J0000F Series are OPIC output, reflective 1. Compliant with RoHS directive photointerrupters with emitter and detector facing the same direction in a molding that provides non-contact Applications sensing. This family of devices uses light modulation to 1. General purpose detection of paper presence or mo- reduce the affects of disturbing light, and the sensor is tion. optimized to work in the selected focal distance. A 3-pin 2. Example : PPC, FAX, Printer connector is included to allow remote-mount or off-board designs. Features 1. Re ective with OPIC Light Modulated Output 2. Highlights : Includes additional screw xing holes Position pin to prevent mis-alignment Short focal distance 3. Key Parameters: Detecting distance : 1 to 9mm (White paper) 3 to 7mm (Black paper) Undetecting distance : over 27mm (White paper) Connector : GP2A25J0000F Tyco Electronics AMP K.K. (PN : 292133-3) GP2A25DJ000F Tyco Electronics AMP K.K. (PN : 292133-3) GP2A25NJJ00F Tyco Electronics AMP K.K. (PN : 4-292133-3) 4. RoHS directive compliant *OPI(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal- processing Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A04901FEN 1 Date Jun. 30. 2005 SHARP CorporationGP2A25J0000F Series Internal Connection Diagram Demodulator circuit Reflective object 1 Voltage regulator 1 V CC 2 2 V OUT 3 GND Amp. 3 Comparator Oscillator circuit Sync. detecting circuit Outline Dimensions (Unit : mm) GP2A25J0000F GP2A25DJ000F 33 26.5 +0 3 0.2 Optical center 3.1 17.7 1 V CC 1 V CC 2 V OUT 2 V OUT 3 GND 3 GND Connector : 292133-3 3.2 3.2 6.2 6 (Tyco Electronics AMP K.K.) 12 12 Connector : 292133-3 7.8 7.5 6 Optical center (Tyco Electronics AMP K.K.) 3 +0 2 +0 3 0.2 3 0.2 3.2 1 2 3 3.5 7.9 4.3 1 26.5 26.5 Unspeci ed tolerance 34.3 Unspeci ed tolerance shall be as follows shall be as follows 4-SR2 07 Dimensions Tolerance Dimensions Tolerance 96 less than 6 0.2 less than 6 0.2 Date code 6 or more less 6 or more less 0.3 0.3 than 14 than 14 Date code 14 or more 0.4 14 or more 0.4 Product mass : approx. 1.95g Product mass : approx. 2.4g GP2A25NJJ00F Optical center 33 (6.8) 3.1 17.7 1 V CC 2 V OUT 3 GND 3.2 6.2 6 12 Connector : 4-292133-3 7.8 (Tyco Electronics AMP K.K.) +0 3 0.2 1 2 3 26.5 07 Unspeci ed tolerance shall be as follows Dimensions Tolerance Date code less than 6 0.2 ( ) : Reference dimensions. : Portion Built-in IR-90 lter 6 or more less 0.3 than 14 Connector terminal plating material : Sn 14 or more 0.4 Product mass : approx. 1.95g Sheet No.: D3-A04901FEN 2 8 9 8 9 4.5 4.5 4.5 4.5 2.5 2.5 (5 .8) (7.8) 2 2 9 9.6 8 7 4.5 3.5 7.8 6.1 2 2 4.5