Blower 97 33 mm San Ace B97 9BMC type General Specifications Material Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0) Expected life See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 10 M or more with a 500 VDC megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -30 to +70C (Non-condensing) Sensor Control Lead wire Red Black Yellow Brown Mass 200 g Specifications The models listed below have pulse sensors with PWM control function. PWM duty Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V % A W min m/min CFM Pa inchH O dB (A) C h cycle* 100 6.2 74.4 8200 1.85 65.3 1950 7.83 69 9BMC12P2G001 12 10.8 to 13.2 20 0.38 4.56 2800 0.58 20.4 121.0 0.48 44 40000/60C -20 to +70 (70000/40C) 100 3.1 74.4 8200 1.85 65.3 1950 7.83 69 9BMC24P2G001 24 21.6 to 26.4 20 0.19 4.56 2800 0.58 20.4 121.0 0.48 44 * PWM frequency: 25 kHz. Fan does not rotate when PWM duty cycle is 0%. The following sensor and control options are available for selection. Differs according to the model. Refer to the table on p. 567. Without sensor Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9BMC12P2G001 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: 12 VDC DC12 V -1 (inch H2O) (Pa) (inch H2O) (Pa) (min ) PWM duty cycle 100% PWM frequency: 25 kHz 12 VDC PWM100% PWM25 kHz DC12 V 9000 8 2000 2000 8 -1 12 V/13.2 V 8200 min 8000 7 PWM duty cyclePWM 7 100% 7000 6 1500 6 1500 6000 10.8 V 5 5 5000 4 1000 4 1000 4000 60% 3 3 3000 2 500 2 500 2000 20% 1 1 1000 0 0 3 3 0 0.5 1.0 1.5 2.0 (m /min) 0 0.5 1.0 1.5 2.0 (m /min) 0 100 (%) PWM PWM duty cycle 0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM) Airflow Airflow 460 Static pressure Static pressure Fan speedR59.61 R51.21 30030 (10) 561 Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example 9BMC24P2G001 With pulse sensor with PWM control function PWM duty cycle Operating voltage range PWM duty - Speed characteristics example Voltage: 24 VDC DC24 V -1 (inch H2O) (Pa) (min ) (inch H2O) (Pa) PWM duty cycle 1PWM100%00% PWM frequency: 25 kHz 24 VDCDC24 V PWM25 kHz 9000 8 2000 8 2000 -1 24 V/26.4 V 8200 min 8000 7 PWM duty cyclePWM 7 100% 7000 6 1500 6 1500 6000 21.6 V 5 5 5000 1000 1000 4 4 4000 60% 3 3 3000 2 500 2 500 2000 20% 1 1 1000 0 0 3 3 0 0.5 1.0 1.5 2.0 (m /min) 0 0.5 1.0 1.5 2.0 (m /min) 0 100 (%) PWM 0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM) PWM duty cycle Airflow Airflow Dimensions (unit: mm) 97.11 331 (50) 390.3 (2.4) (1.5) 4-4.50.3 (21) 31.50.3 Lead wire (10) Mounting hole Rated voltage 12 V fan 12 V AWG 20 AIR FLOW UL 1430 Rated voltage 24 24 V V fan AWG 24 UL 1430 260.3 (5) 320.3 Airflow direction Rotating direction 461 (18.6) (18.6) Static pressure Static pressure (58) (8) (1.5) 390.3 (52) (1.5) 320.3 Fan speed 390.3 450.3 951 Blower 97 mm DC