NOTES: REVISION DESIGNED & DIMENSIONED ASP-199169-XX IN MILLIMETERS INCHES 1. CUSTOM JSOM FOR VITA MEZZANINE APPLICATIONS. CX-X-XX 2. REPRESENTS A CRITICAL DIMENSION. 3. STANDOFFS TO BE USED WITH 1.50 .059 MIN THICK BOARDS. BOARD STACK HEIGHT 4. STANDOFFS ARE DESIGNED 0.15MM LONGER THAN CONNECTOR -01: 8.650 (WITH THREAD LOCKING SCREW) STACK HEIGHTS TO ALLOW FOR PROCESSING VARIABLES. -02: 10.150 (WITH THREAD LOCKING SCREW) 5. TORQUE TO 2.5 3.5 IN*LBS TO SECURE FASTENER IN A STATIC ENVIRONMENT -03: 12.150 (WITH THREAD LOCKING SCREW) ASSUMING RECOMMENDED BOARD TO BOARD DISTANCES ARE ACHIEVED -04: 8.650 (WITHOUT THREAD LOCKING SCREW) WITHOUT DAMAGE TO THE PCB, HARDWARE OR OTHER COMPONENTS. -05: 10.150 (WITHOUT THREAD LOCKING SCREW) 6. COMPONENTS TO BE BULK PACKAGED IN SEPARATE BAGS AND SHOULD -06: 12.150 (WITHOUT THREAD LOCKING SCREW) NOT LIST INDIVIDUAL COMPONENT QUANTITY ON THE LABEL. ALL COMPONENT BAGS ARE TO BE PACKAGED IN A LARGER BAG WITH THE FINAL PART NUMBER QUANTITY OF ASSEMBLIES ON THE LABEL. 5.41 .213 HEX REF B 1 1.91 .075 REF 3.50 .138 REF B 2 8.50 .335 REF 5.80 .228 B REF 0.05 .002 C1-B-DC 3 REF KEEP OUT AREA 6.00 .236 4 3.20 .126 4.76 .188 RECOMMENDED BOARD CUTOUT PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN MILLIMETERS. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR X.X: 0.3 .01 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY X.XX: 0.13 .005 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS X.XXX: 0.051 .0020 ITEM NO. PART NUMBER QUANTITY MATERIAL WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: 1 ASP-199172-01-C 1.0000 303 STAINLESS STEEL M3 MICRO JACK SCREW STAND-OFF 2 ASP-199170-01-B 1.0000 304 STAINLESS STEEL DWG. NO. ASP-199169-XX 3 ASP-199171-XX-B (SEE TABLE 1) 1.0000 305 STAINLESS STEEL CANDY W 04/21/2017 BY: SHEET OF1 1 F:t 2021 CASP Porject 12. JSOM and ASP prints update ASP-199169-XX REV B.SLDDRW 4 ASP-199173-XX-C (SEE TABLE 1) 1.0000 306 STAINLESS STEEL DATE: BY SIGNING THIS DOCUMENT COMPANY: YOU ARE ACCEPTING THE CONDITIONS SET WITHIN. CUSTOMER SIGNATURE: YOUR REQUIREMENTS MUST BE PRINTED NAME: LISTED WITHIN THIS DRAWING. PHONE No: WHERE NO DIRECTION FROM THE CUSTOMER IS IDENTIFIED EXCEPTIONS: SAMTEC S PROCESS REQUIREMENTS WILL BE USED.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Screws & Fasteners category: Click to view products by Samtec manufacturer: Other Similar products are found below : 5721-1440-1/4-SS 593503FX 0098.0094 0098.9206 0098.9219 0098.9262 596-2114-013 59781-6 0098.0026 0098.9210 0098.9212 60227- 01 60227-04 60227-08 60687-01 LOCK WASHER Black 618-00001 62153-03 62153-11 M316-KSSTMCZ100 M3440-SS M3442-SS M3448-SS 6292-1 6-306105-9 6-306131-4 690432-1 699161-000 7230-3 7244 7248-1 7248-2 73542-02 CAPTIVE SHORT THUMBSCREW 745564-1 F1209 751-00001 7680 809704-1 8700 8860220 9047 9521 992326-6 992763-3 1-18024-0 1-18028-2 A168P1 A495P1 1-24921-1 125416-1 1260