BA6285AFP-YE2

Reversible Motor Drivers for Brush Motors 1.0A Reversible Motor Drivers (Single Motor) No.11008EBT02 BA6956AN,BA6287F,BA6285FS,BA6285AFP-Y,BA6920FP-Y Description The reversible motor driver for output 1.0A for 1 motor can set the output modes to four modes, normal, reverse, stop (idling), and braking in accordance with logic input (2 inputs). Features 1) Built-in surge absorption diode 2) By built-in power save circuit, current consumption when a motor stops (idles) can be suppressed 3) Output voltage can be optionally set by reference voltage setting pin 4) Built-in thermal shutdown circuit (TSD) Applications Audio-visual equipment PC peripherals Car audios Car navigation systems OA equipments Absolute maximum ratings (Ta=25, All voltages are with respect to ground) Ratings Parameter Symbol Unit BA6956AN BA6287F BA6285FSBA6285AFP-Y BA6920FP-Y Supply voltage VCC 18 18 18 30 36 V Supply voltage VM 18 18 18 30 36 V 1 1 1 1 1 Output current I 1* 1* 1* 1* 1* A OMAX Operating temperature T -20 ~ 75 -20 ~ 75 -20 ~ 75 -40 ~ 85 -30 ~ 85 OPR Storage temperature T -55 ~ 150 -55 ~ 150 -55 ~ 150 -55 ~ 150 -55 ~ 150 STG 2 3 4 5 5 Power dissipation Pd 1.19* 0.689* 0.813* 1.45* 1.45* W Junction temperature T 150 150 150 150 150 jmax *1 Do not, exceed Pd or ASO. *2 SIP9 package. Derated at 9.5mW/ above 25. *3 SOP8 package. Mounted on a 70mm x 70mm x 1.6mm FR4 glass-epoxy board with less than 3% copper foil. Derated at 5.52mW/ above 25. *4 SSOP-A16 package. Mounted on a 70mm x 70mm x 1.6mm FR4 glass-epoxy board with less than 3% copper foil. Derated at 6.5mW/ above 25. *5 HSOP25 package. Mounted on a 70mm x 70mm x 1.6mm FR4 glass-epoxy board with less than 3% copper foil. Derated at 11.6mW/ above 25. Operating conditions (Ta=25) Ratings Parameter Symbol Unit BA6956AN BA6287F BA6285FSBA6285AFP-Y BA6920FP-Y Supply voltage VCC 6.5 ~ 15 4.5 ~ 15 4.5 ~ 15 4.5 ~ 24 6.5 ~ 34 V Supply voltage VM 6.5 ~ 15 4.5 ~ 15 4.5 ~ 15 4.5 ~ 24 6.5 ~ 34 V VREF voltage VREF < VCC, VM < VCC, VM < VCC, VM < VCC, VM < VCC, VM V www.rohm.com 2011.05 - Rev.B 1/17 2011 ROHM Co., Ltd. All rights reserved. Technical Note BA6956AN,BA6287F,BA6285FS,BA6285AFP-Y,BA6920FP-Y Electrical characteristics (BA6956AN, unless otherwise specified, Ta=25 and VCC=9V, VM=9V) Limits Parameter Symbol Unit Conditions Min. Typ. Max. Supply current 1 I - 29 44 mA FWD/REV mode CC1 Supply current 2 I - 56 80 mA Brake mode CC2 Supply current 3 I - 0 15 A Standby mode CC3 Input threshold voltage H V 2.0 - VCC V IH Input threshold voltage L V 0 - 0.8 V IL Input bias current I 50 90 131 A V =2V IH IN Output saturation voltage V - 1.7 2.3 V I =0.2A, vertically total CE O VREF bias current I - 10 25 A I =0.2A, VREF=6V REF O Electrical characteristics (BA6287F, unless otherwise specified, Ta=25 and VCC=9V, VM=9V, VREF=9V) Limits Parameter Symbol Unit Conditions Min. Typ. Max. Supply current 1 I 12 24 36 mA FWD/REV mode CC1 Supply current 2 I 29 48 67 mA Brake mode CC2 Standby current I - 0 15 A Standby mode ST Input threshold voltage H V 2.0 - VCC V IH Input threshold voltage L V 0 - 0.8 V IL Input bias current I 45 90 135 A V =2V IH IN Output saturation voltage V - 1.0 1.5 V I =0.2A, vertically total CE O VREF bias current I 6 12 18 mA I =0.2A, FWD or REV mode REF O Electrical characteristics (BA6285FS, unless otherwise specified, Ta=25 and VCC=9V, VM=9V, VREF=9V) Limits Parameter Symbol Unit Conditions Min. Typ. Max. Supply current 1 I 12 24 36 mA FWD/REV mode CC1 Supply current 2 I 29 48 67 mA Brake mode CC2 Standby current I - 0 15 A Standby mode ST Input threshold voltage H V 2.0 - VCC V IH Input threshold voltage L V 0 - 0.8 V IL Input bias current I 45 90 135 A V =2V IH IN Power save on voltage V 2.0 - VCC V Standby mode PSON Power save off voltage V 0 - 0.8 V Operation PSOFF Output saturation voltage V - 1.0 1.5 V I =0.2A, vertically total CE O VREF bias current I 6 12 18 mA I =0.2A, FWD or REV mode REF O www.rohm.com 2011.05 - Rev.B 2/17 2011 ROHM Co., Ltd. All rights reserved.