HXR6101 16Gbps TIA Receiver Datasheet Description Features -12 The HXR6101 Trans-impedance Limiting 20 App receiver sensitivity for 10 BER at Amplifier is targeted at the optical links market. 10.3 Gbps Together with a PIN detector, high-capacity, Better than 3 mApp overload high-availability optical links can be designed for 60 mW power consumption with low power datacom applications. setting Adjustable output swing size and pre- The 3.3V SiGe device integrates the trans- emphasis mode and signal detect threshold impedance pre-amplifier, the limiting post- A/D read-out of temperature, RSSI amplifier and a versatile CML output stage for a information single 16 Gbps channel. Ordering Information Typical Applications Part Temp Range Pin-Package IEEE 802.3ae Ethernet transceivers Bare Die InfiniBand QDR & FDR active cables HXR6101-DNT 0C to +85C 750um x 750um Proprietary optical modules HXR6101-EVB Room Temp Evaluation Board For price, delivery schedules, and to place orders, please contact IDT: www.IDT.com/go/sales Block Diagram Figure 1: Block Diagram 2018 Integrated Device Technology, Inc. 1 March 5, 2018 HXR6101 Datasheet Corporate Headquarters Sales Tech Support 6024 Silver Creek Valley Road 1-800-345-7015 or www.IDT.com/go/support San Jose, CA 95138 408-284-8200 www.IDT.com Fax: 408-284-2775 www.IDT.com/go/sales DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as IDT) reserve the right to modify the products and/or specifications described herein at any time, without notice, at IDT s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved. 2018 Integrated Device Technology, Inc. 2 March 5, 2018