QPQ1909EVB01

QPQ1909 Wi-Fi edgeBoost BAW Filter Product Overview The Qorvo QPQ1909 is an high-performance, high power, Bulk Acoustic Wave (BAW) band-pass filter with extremely steep skirts, simultaneously exhibiting low loss in the Wi-Fi band (Channels 1-14) and high near-in rejection in the 2.4GHz bands. The filter module is specifically designed to enable industry leading bandedge performance in Wi-Fi applications that result in higher regulatory power capability in more Wi-Fi channels than systems with no or traditional filter solutions. End users will see a better capability to deliver Quality of Service (QoS) 5 Pad 1.4x1.2mm Laminate Package features at a system level. With Channels 1-14 enabled, users can accommodate any regulatory region needed by the end product Key Features Using common module packaging techniques to achieve the 2402-2494MHz industry standard footprint while negating as many external Low Insertion Loss in Wi-Fi Channels 1-14 passive placements to help end users ease of integration into Increased bandedge compliance for more Wi-Fi channels their circuits Extended temperature performance from 0 to +90 C High power handling to +30dBm averaged Input Power Applications Access Points Wireless Routers Functional Block Diagram Residential Gateways Customer Premise Equipment Internet of Things Ordering Information Part Number Description QPQ1909SB Sample bag with 5 pieces QPQ1909SR 7 reel with 100 pieces QPQ1909TR13 13 reel with 10,000 pieces QPQ1909EVB-01 Assembled Evaluation Board Top View QPQ1909 Data Sheet 030320 Subject to change without notice www.qorvo.com 1 of 5 QPQ1909 Wi-Fi Bandedge BAW Filter Absolute Maximum Ratings Parameter Conditions Rating Operating Case Temperature No damage -40 to 105C Storage Temperature -40 to 125C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Minimum Lifetime Ratings Parameter Conditions Rating Power Handling 802.11n MCS0 signal, 10dB PAR, applied +30 dBm to Pin 1 MTTF >1M hours, +90C Recommended Operating Conditions Parameter Min. Typ. Max. Units TOPERATING* 0 +90 C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. * TOPERATING is temperature at the package ground Electrical Specifications Conditions Min. Typ. Max. Units Parameter (1)(4) (INPUT-OUTPUT) Unless otherwise noted: Typ. T = 45C f = 2402.5-2421.5 MHz (CH1) - 1.2 2.0 dB f = 2407.5-2426.5 MHz (CH2) - 1.0 1.5 dB (2) Insertion Loss f = 2412.5-2476.5 MHz (CH3-12) - 0.9 1.5 dB f = 2462.5-2481.5 MHz (CH13) - 0.8 1.5 dB f = 2474.5-2493.5 MHz (CH14) - 1.0 2.0 dB f = 2402.5-2421.5 MHz (CH1) - 1.3 4.7 dB f = 2407.5-2426.5 MHz (CH2) - 0.6 2.0 dB Amplitude Variation f = 2412.5-2476.5 MHz (CH3-12) - 0.4 1.4 dB f = 2462.5-2481.5 MHz (CH13) - 0.3 0.8 dB f = 2474.5-2493.5 MHz (CH14) - 0.6 2.1 dB INPUT VSWR f = 2402.5-2493.5 MHz 1.5:1 2.8:1 OUTPUT VSWR f = 2402.5-2493.5 MHz 1.5:1 2.7:1 INPUT Return Loss f = 2402.5-2493.5 MHz 14 dB OUTPUT Return Loss f = 2402.5-2493.5 MHz 14 dB (3) f = 1900 2300 MHz 17 20 - dB Attentuation (3) f = 2300 2390 MHz 19 26 - dB Notes: 1) All specifications are based on the QPQ1909 Applications Circuit 2) Data is the integrated value of the linear s-parameter over 19 MHz channel 3) Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature 4) Pin 1 must be used for input. The large signal performance of this filter, such as power handling, may not be symmetric. QPQ1909 Data Sheet 030320 Subject to change without notice www.qorvo.com 2 of 5