WWW.PHIHONG.COM
2.5W USB Adapter with Interchangeable Plugs
PSC03R Adapter Meets CEC and EISA Requirements
Features
USB Socket Low Leakage Current
Field Changeable AC Plugs UL 94 Vo Flammability
ECOC Compliance Efficiency Level IV Compliance
Applications
Wireless Communications Portable Equipment
Peripherals Networking
Safety Approvals
cUL/UL C-Tick
SAA
Mechanical Characteristics
Length: 75.32mm (2.97in) Height: 31.67mm (1.25in)
Width: 45.96mm (1.81in) Weight: 61.1g (2.16oz)
Output Specifications
(2)
Load Ripple Regulation Efficiency
DC Output
(1)
Model
(3)
Voltage Min. Max. P-P (max.) Line & Load Level
PSC03R-050 5V 0A 0.5A 55mV 5%
(1) Minimum order quantity of 4000 pieces
(2) Measured after 10 minutes warm up at 25C with 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in
parallel.
(3) Level IV efficient products do not qualify for CE marking and therefore cannot be sold to countries in the EU
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
Revised 11/8/2013 PSC03R Characteristics WWW.PHIHONG.COM
Input: Over-Voltage Protection
8V DC maximum
AC Input Voltage Rating
100 to 240V AC
Over-Current Protection
0.75A maximum
AC Input Voltage Range
90 to 264V AC
Short-Circuit Protection
Output can be shorted permanently without damage
AC Input Frequency
47 to 63Hz
Environmental:
Input Current Temperature
0.15A (RMS) 115V AC at maximum load Operation 0 to +45C
0.08A (RMS) 230V AC at maximum load Non-operation -40 to +85C
Humidity 10 to 95% Non condensing
Leakage Current
0.02mA maximum at 254V AC, 50Hz Emissions
FCC Part 15 Class B
EN55022 Class B
Inrush Current
30A for 120V AC at maximum load
Immunity
50A for 240V AC at maximum load
EN61000-4-2
(Cold start at ambient 25C)
EN61000-4-3
EN61000-4-4
Input Power Saving
EN61000-4-5
0.3W maximum, no load
EN61000-4-6
EN61000-4-8
Output:
EN61000-4-11
Efficiency
63% average; meets CEC level IV
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000V AC for 1 min., 10mA
Hold-up Time
10mS minimum, at maximum load at 120V AC
DC Output Connector
Dimension Diagram Unit: mm (inch)
USB Type A, receptacle, single.