PAN9028 Wi-Fi Dual Band 2.4 GHz/5 GHz and Bluetooth Module Product Specification Rev. 1.1 Wireless Connectivity PAN9028 Bluetooth Module Coexistence interface for arbitration of Overview co-located WLAN, Bluetooth, or mobile wireless The PAN9028 is a 2.4GHz and 5GHz ISM band system (e.g. LTE or ZigBee ) Wi-Fi and Bluetooth radio module, which includes a Generic interfaces include SDIO 3.0 and wireless radio and a power management IC for high-speed UART for host processor connection easy integration of Wi-Fi and Bluetooth connectivity Software driver Linux into various electronic devices. Characteristics Features Surface Mount Type (SMT) Dual band 2.4GHz and 5GHz 802.11 a/b/g/n/ac 24mm 12mm 2.8mm Wi-Fi/Bluetooth combo module NXP 88W8987 WLAN 2.4GHz and 5GHz and Supports 802.11i security standards through AES, Bluetooth single-chip solution inside CCMP, and more security mechanism Single power supply: 3.3V with Marvell 802.11e Quality of Service is supported for 88PG823 Power Management IC (optional) multimedia application Tx power: 16dBm at 802.11b IEEE 802.11ac (Wave 2), 11 spatial stream with Rx sensitivity: 97dBm at 802.11b DSSS data rates up to 433Mbps (MCS9, 80MHz 1Mbps channel bandwidth) IEEE 802.11ac 20MHz, 40MHz, 80MHz IEEE 802.11ac MU-MIMO beamformee channel bandwidth Bluetooth 5 (includes Low Energy) Long and Short Guard Interval support Dual simultaneous and independent WLAN and Current consumption Wi-Fi typical 320mA (at Bluetooth operation Tx) and 70mA (at Rx) Dynamic Rapid Channel Switching (DRCS) for SDIO 1bit or 4bit simultaneous operation in 2.4GHz and 5GHz bands Wide temperature range of -30C to 85C Indoor location and navigation with IEEE 802.11mc Block Diagram PAN9028 Wi-Fi and Bluetooth Radio Module PMIC IEEE 802.11 a/b/g/n/ac 88PG823 Bluetooth 5 (BR, Low Energy, and EDR) V +3.3 V DD GPIOs Sleep Clock Chip Crystal Antenna 26 MHz PDN 88W8987 V /V IO IOSD Radio SoC COEX BPF UART SDIO Interface PCM Interface SPDT DPX SPDT RF SW RF Pad Product Specification Rev. 1.1 Page 2 of 99