QVE00039 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH PACKAGE DIMENSIONS 0.160 (4.06) RED ANODE 0.250 0.060 BLACK CATHODE 0.010 (0.25) (1.52) (6.35) WHITE COLLECTOR (2X) DARK GREEN EMITTER 0.131 (3.32) W 0.230 B 0.375 R (5.84) (9.52) DG 10.000.50 (25412.7) 0.170 (4.32) FULL RADIUS 0.060 SCHEMATIC (2X) (1.52) BLACK WHITE 0.050 0.445 FEATURES (1.27) (11.30) 0.145 No contact switching 0.095 (2.41) (3.68) 2.41 mm wide slot 0.385 Slot horizontal to mounting surface (9.78) RED DARK GREEN Mounting tabs Transistor Output FULL RADIUS 0.060 0.150 (4X) (3.81) (1.52) 0.245 Wire leads for remote connection 10 (254mm) (6.22) Opaque black plastic housing 0.070 (1.78) 0.655 0.010 (0.25) aperture width (2X) (16.64) 45 NOTES (Applies to Max Ratings and Characteristics Tables.) (2X) 1. Derate power dissipation linearly 1.67 mW/C above 25C. NOTES: 2. RMA flux is recommended. 1. Dimensions are in inches (mm) 3. Methanol or isopropyl alcohols are recommended as 2. Tolerance of .010 (.25) on all non nominal dimensions cleaning agents. unless otherwise specified. 3. Wire gauge: 28 AWG 4. Soldering iron 1/16 (1.6mm) minimum from housing. (T = 25C unless otherwise specified) ABSOLUTE MAXIMUM RATINGS A Parameter Symbol Rating Units C Operating Temperature T -40 to +85 OPR C Storage Temperature T -40 to +85 STG (2,3,4) C Lead Soldering Temperature (Iron) T 240 for 5 sec SOL-I EMITTER Continuous Forward Current I 50 mA F Reverse Voltage V 5V R (1) Power Dissipation P 100 mW D SENSOR Collector-Emitter Voltage V 30 V CEO Emitter-Collector Voltage V 4.5 V ECO (1) Power Dissipation P 100 mW D 1 of 4 100016CQVE00039 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH (T = 25C) ELECTRICAL / OPTICAL CHARACTERISTICS A PARAMETER TEST CONDITIONS SYMBOL MIN TYP MAX UNITS EMITTER Forward Voltage I = 20 mA V 1.7 V F F Reverse Current V = 5 V I 100 A R R Peak Emission Wavelength I = 20 mA 940 nm F PE SENSOR Collector-Emitter Breakdown I = 1 mA BV 30 V C CEO Emitter-Collector Breakdown I = 0.1 mA BV 5 V E ECO Dark Current V = 10 V, I = 0 mA I 100 nA CE F D COUPLED Collector Current I = 20 mA, V = 10 V I 0.5 mA F CE C(ON) Collector Emitter I = 20 mA, I = 0.4 mA V 0.4 V F C CE (SAT) Saturation Voltage Rise Time V = 5 V, R = 100 t 8 s CE L r Fall Time I = 5 mA t 50 s C(ON) f TYPICAL PERFORMANCE CURVES Fig. 1 Forward Voltage vs. Ambient Temperature Fig. 2 Forward Current Vs. Forward Voltage 3 100 I Pulsed T = 25C F A Pulse Width = 100 s Duty Cycle = 0.1% 80 I = 100 mA F 2 I = 50 mA F 60 40 1 I = 20 mA F I = 10 mA F 20 0 0 -40 -20 0 20 40 60 80 100 1.0 1.1 1.2 1.3 1.4 1.5 1.6 T - AMBIENT TEMPERATURE (C) V - FORWARD VOLTAGE (V) A F Fig. 3 Collector Emitter Dark Current (Normalized) Fig. 4 Rise and Fall Time vs. Load Resistance vs. Ambient Temperature 4 10 100 Normalized to: V = 25 V V = 5 V t CE CC f V = 25 V CE T = 25C A I = 0.5 mA C 3 10 t t = 100 us r pw T = 10 ms t V = 10 V f CE T = 25C 10 A 2 10 t r 1 10 1 0 10 -1 10 0.1 40 60 80 100 10 100 1000 T - AMBIENT TEMPERATURE (C) R - LOAD RESISTANCE ) L A 2 of 4 100016C I - NORMALIZED DARK CURRENT V - FORWARD VOLTAGE (V) CEO F RISE AND FALL TIME (s) I - FORWARD CURRENT (mA) F