NUF2230XV6 2 Line EMI Filter with ESD Protection This device is a 2 line EMI filter array for wireless applications. Greater than 30 dB attenuation is obtained at frequencies from 800 MHz to 900 MHz. It also offers ESD protectionclamping NUF2230XV6 MAXIMUM RATINGS (T = 25C unless otherwise noted) J Parameter Symbol Value Unit ESD Discharge IEC6100042 V kV PP Air Discharge 15 Contact Discharge 8.0 SteadyState Power per Resistor P mW R SteadyState Power per Package P mW T Operating Temperature Range T 40 to 85 C OP Storage Temperature Range T 55 to 150 C STG Maximum Lead Temperature for Soldering Purposes (1.8 in from case for 10 seconds) T 260 C L Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. ELECTRICAL CHARACTERISTICS (T = 25C unless otherwise noted) J Parameter Symbol Test Conditions Min Typ Max Unit Maximum Reverse Working Voltage V 5.0 V RWM Breakdown Voltage V I = 1.0 mA 6.0 7.0 V BR R Leakage Current I V = 3.0 V 1.0 A R RWM Resistance R I = 20 mA 90 100 110 A R Capacitance (Notes 1 and 2) Cd V = 2.5 V, f = 1.0 MHz 16 pF R CutOff Frequency (Note 3) f Above this frequency, 125 MHz 3dB appreciable attenuation occurs 1. Measured at 25C, V = 2.5 V, f = 1.0 MHz. R 2. Total line capacitance is 2 times the Diode Capacitance (Cd). 3. 50 source and 50 load termination.