ADADRR ADRADR ADADRR Industrial Ethernet Cables XS5/XS6 Cables and Connectors for EtherCAT and Other Indus- trial Ethernet Networks CAT6a Ethernet patch cables For in-cabinet use LSZH with standard RJ45 plugs CAT5e Ethernet patch cables For out-of-cabinet use PUR with standard RJ45 plugs PVC with rugged RJ45 plugs PVC with M12 SmartClick plugs In addition to cables with sockets and robot cables, shield strengthening cables joined. Connection Examples Control panel Ideal for out-of-cabinet Ideal for in-cabinet XS6W-5PUR XS5 XS6 XS6W-6LSZH Standard Connectors Rugged Connectors Rugged Assembly Connectors Standard Connectors XS5 M12 Connectors (Waterproof) 1XS5/XS6 Industrial Ethernet Cables Features Cables with Standard RJ45 Connectors For details, refer to page 4. The lineup features LSZH cables* for in-panel wiring and PUR cables for wiring outside of panels. The Standard RJ45 Connectors reduce cable routing space. LSZH cables are AWG26 with an outer diameter of 6.3 mm. PUR Cables are AWG26 with an outer diameter of 6.0 mm. Cable colors include blue, yellow, or green. LSZH cables are available in 12 lengths from 0.2 to 20 m and PUR cables are available in 10 lengths from 0.5 to 20 m. Single-shielded cables with individual aluminum tape on each wire pair to reduce EMC interference in industrial environments. Note. PUR cables are double-shielded cables with overall braiding and individual aluminum tape on each wire pair. * Low-smoke zero-halogen cables. Shape of RJ45 Connector Cables with Rugged RJ45 Connectors For details, refer to page 7. Tough latches and RJ45 connectors with strong cable holding strength are used to enable connections outside of control panels. Quad AWG22 cable with PVC cover of 6.5 mm outer diameter. Double-shielded cables with overall braiding and individual foil shield to reduce EMC interference in industrial environments. Shape of RJ45 Connector PVC Cable with Double Shield Tough latch Overall braiding and individual foil shield Assembly Connectors You can easily assemble Ethernet cables onsite without crimping tools or other special tools. Refer to page 14 for the assembly procedure. Cable Extension Length Standard Connectors (RJ45 Connectors) Rugged Connectors (RJ45 Connectors) 61 mm 89 mm Minimum cable Minimum cable bending bending radius: radius: 40 mm 25 mm 2