PTF-14-PU-L

Sockets with Push-In Plus technology PYF- -PU/PTF- -PU/P2RF- -PU Sockets with Push-In Plus technology to Save Work Added to Series for MY, LY and G2R-S Relays Sockets with Push-In Plus technology are used to save wiring work in comparison with traditional screw terminals. (Wiring time is reduced by 60%* in comparison with traditional screw terminals.) No screw loosening means maintenance-free application. Light insertion force and strong pull-out strength to achieve both less wiring work and high reliability. Hand-free structure that holds an inserted screwdriver to achieve easier wiring work for stranded wires. For the most recent information on models that have been Two wires can be independently inserted into each terminal hole. certified for safety standards, refer to your OMRON website. DIN Track mounting or screw mounting. * According to OMRON actual measurement data from November 2015. Refer to Safety Precautions on page 10. Features Coil terminals and contact terminals are completely separated in an organized wiring layout. A Release Lever is provided as a standard feature. (except -L models) DIN terminal numbers are indicated. The double fixture rail with DIN hook tabs attached to the top and bottom lets you mount the Socket from either the top or bottom. One-touch Installation onto DIN-track. Front-in short bar enables easy installation without interference in duct when wiring. Please refer short bar correspondence table in page 9 for further information of short bar. There are screw mounting holes in the DIN hooks on the PYF- -PU, PTF- -PU and P2RF- -PU. Pull out the DIN hook tabs to mount the Sockets with screws. DIN hook tab (the fixture rail) Contact terminals The fixture rails can be (commons) pulled out to mount the Contact short bar Relays with screws. insertion holes * Double NO contact terminals fixture rails NC contact terminals Release lever Coil short bar Back of Push-In Plus insertion holes * Terminal Block Socket Coil terminals * The PTF- -PU Sockets do not have short bar insertion holes. 1PYF- -PU/PTF- -PU/P2RF- -PU Ordering Information Sockets PYF Series Socket Applicable model (typical example) No. of poles Model * MY2 2 PYF-08-PU MY2IN(S) MY4 General Purpose Relays MY Series MY4H MYQ4 4 PYF-14-PU MY4 (S) MY2K G3FM Series G3FM SSR G3F 1 PYF-08-PU G3F/G3FD Series G3FD H3Y(N)-2-B 2 PYF-08-PU-L H3Y Series Timers H3YN Series H3Y(N)-4-B 4 PYF-14-PU-L * The PYF- -PU-L Sockets do not have release levers. PTF Series Socket Applicable model (typical example) No. of poles Model * LY2 PTF-08-PU 2 General Purpose Relays LY Series LY2 -CR PTF-08-PU-L LY4 4 PTF-14-PU-L G3H G3H Series G3HD SSR 1 PTF-08-PU G9H Series G9H Note: Hybrid Power Relay E5L-A Temperature Controller E5L --- PTF-14-PU-L E5L-C * The PTF- -PU-L Sockets do not have release levers. P2RF Series Socket Applicable model (typical example) No. of poles Model General Purpose Relays G2R- -S (S) Series G2R-1-S (S) G3R-I/O Series G3R SSR 1 P2RF-05-PU G3RZ Series G3RZ Timers H3RN Series H3RN-1-B General Purpose Relays G2R- -S (S) Series G2R-2-S (S) 2 Timers H3RN Series H3RN-2-B P2RF-08-PU Liquid Leakage Sensors K7L Series K7L- B--- 2