Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier EE-SPX613 CSM EE-SPX613 DS E 5 2 Liquid Level Photomicrosensor with operation mode and sensitivity selectors for easy application. Operation mode selector allows modes to be switched easily. Sensitivity selector is suitable for any 6- to 13-mm-diameter transparent or semi-transparent pipe with a wall thickness of 1 mm. Uses a clean (with no powder parting agent) cable. Operating voltage range: 12 to 24 VDC For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 3. Ordering Information Appearance Sensing method Output type Output configuration Cable length Model Through-beam Dark-ON or Light-ON NPN output 1 m EE-SPX613 1M type (selectable) 1EE-SPX613 Ratings and Specifications Item Models EE-SPX613 Any 6- to 13-mm-diameter pipe with a wall thickness of 1 mm that is made of FEP or any other material as transparent Applicable pipe as FEP. Liquids in pipes Sensing object (High-viscosity liquids or liquids with floating materials may not be detected.) Light source GaAs infrared LED with a peak wavelength of 940 nm Indicator Light indicator GaP (Red LED: Peak wavelength of 700 nm) Supply voltage 12 to 24 VDC 10%, ripple (p-p): 5% max. Current consumption Average: 30 mA max., Peak: 80 mA max. NPN open collector: Load power supply voltage: 5 to 24 VDC Load current: 100 mA max. Control output OFF current: 0.5 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max. Ambient illumination 3,000 lx max. with incandescent light or sunlight on the surface of the receiver Ambient temperature Operating: 10 to +55C range Storage: 25 to +65C (with no icing or condensation) Ambient humidity Operating: 5% to 85% range Storage: 5% to 95% (with no condensation) 2 Destruction: 10 to 500 Hz, 1.0-mm single amplitude or 150 m/s in X, Y, and Z directions Vibration resistance 3 times and for 11 min each 2 Shock resistance Destruction: 500 m/s for 3 times each in X, Y, and Z directions Degree of protection IEC 60529 IP50 Connecting method Pre-wired (Standard length: 1 m) Weight (packed state) Approx. 55 g Case Material Polycarbonate Cover Accessories Support belt (2), slip protection tube (2), Instruction Manual I/O Circuit Diagrams NPN Output Output Operation Model Timing charts Output circuit configuration mode selector Incident (with no liquid) Interrupted (with liquid) ON Light indicator (red) OFF DON Dark-ON ON Output (DARK ON) Light indicator transistor (red) OFF (Brown) Operates Load Load (relay) Releases OUT Main EE-SPX613 12 to 24 VDC circuit Incident (with no liquid) (Black) Interrupted (with liquid) ON Light indicator (red) OFF LON (Blue) Light-ON ON Output (LIGHT ON) transistor OFF Operates Load (relay) Releases 2