A16 / M16 Pushbutton Switch / Indicator Mounting Aperture of 16 mm Modular construction (Pushbutton + Case + Lamp + Switch Unit) Wide Variety of Control and Signal Devices: Lighted, Non-Lighted, and Buzzer (Refer to page 47.) UL and CSA approved, VDE (pending) Conforms to EN60943-5-1, IEC947-5-1 Quick and easy assembly, snap-in Switch Unit. Wide range of switching capacity from general to microload High reliability, IP65 RcR Short mounting depth, less than 28.5 mm below panel Ordering Information Construction Flange Shape Available Colors For LED/incandescent Rectangular Square Round Red, green, yellow, white, blue (A16 -J) (A16 -A) (A16 -T) For neon Red, green For non-lighted Red, green, yellow, white, blue, black Protective Structure and Terminal Type Protective Structure IP40/Oil-resistant IP65 Terminal Type Solder terminals (tab terminals 110) Lamp LED Incandescent lamp Switch Unit Specifications Neon lamp Ratings 125 VAC: 5 A 250 VAC: 3 A 30 VDC 3 A Minimum applicable load: 1 mA at 5 VDC Structure of Pushbutton Lens Legend plate Dispersion plate Reflective plunger 1A16 / M16 A16 / M16 Model Number Legend 1. Pushbutton Non-lighted/Lighted A16 L- 123 1. Degree of Protection 3. Illumination Color for non-lighted None: IP40 R: Red 5: IP65 G: Green Y: Yellow 2. Flange Shape W: White J: Rectangular A: Blue T: Round B: Black A: Square Illumination Color for lighted LED/Incandescent Lamp R: Red Y: Yellow W: White A: Blue LED GY: Green Incandescent Lamp G: Green Neon Lamp RN: Red GN: Green 2. Lamp A16- 12 1. Operating Voltage (Rated Voltage) 2. Illumination Color Incandescent Lamp None: Incandescent Lamp 5: 5 VAC/DC (6 VAC/DC) R: Red (LED) 12: 12 VAC/DC (14 VAC/DC) G: Green (LED) 24: 24 VAC/DC (28 VAC/DC) Y: Yellow (LED) LED W: White (LED) 5D: 5 VDC (5 VDC) A: Blue (LED) 12D:12 VDC (12 VDC) RN: Red (Neon Lamp) 24D:24 VDC (24 VDC) GN: Green (Neon Lamp) Neon Lamp 1N: 100 VAC 110 VAC) 2N: 200 VAC (220 VAC) 3. Case (Common Use) A16 - 123 1. Degree of Protection 3. Switch Action None: IP40 M: Momentary 5: IP65 A: Alternate 2. Flange Shape CJ: Rectangular CT: Round CA: Square 2