98-CAL020

Code Reader Group Catalog 1D / 2D C Verification ode 1D / 2D C Reader odeCode Reader Group Catalog 2 Total solution from recognition to print quality verification 1D / 2D Symbols and Direct Part Marks Linear (1D) barcodes have been in commercial use since the 1970s and are the most common symbologies used for automatic identification. 1D and 2D Symbology Standards Increasing numbers of manufacturers are using two-dimensional (2D) ISO / IEC 15416 symbols, such as Data Matrix, that offer greater placement flexibility 1D Print Quality Standard and increased data capacity. ISO / IEC 15415 Machine-readable symbols generally fall into the categories of linear 2D Print Quality Standard barcodes, stacked symbols, 2D symbols and Optical Character Recog- Automotive Industry Action Group: AIAG B-4 nition (OCR) fonts. Parts Identification and Tracking OMRON Microscan provides fast, reliable reading solutions for 1D and U.S. Department of Defense: IUID MIL-STD-130 2D Symbology Standards in the right and OCR. Our products read any Permanent and Unique Item Identification linear barcodes or 2D symbols printed or marked by any means, and Electronics Industry Association: EIA 706 verify them to industry standards. Component Marking Note: OMRONs F430-F and F420-F Smart Cameras provide Optical Character Clinical / Laboratory Standards Institute: AUTO2-A2 Recognition (OCR). The code readers in this catalog do not provide OCR. Bar Codes for Specimen Container Identification LINEAR BARCODES STACKED SYMBOLOGIES ISO / IEC 16022 International Symbology Specification Code 128 PDF417 ISO / IEC 15434 Symbol Data Format Syntax Society of Aerospace Engineers: AS9132 Code 39 GS1 DataBar (Stacked) Data Matrix Quality Requirements For Part Marking AIM DPM / ISO 29158 Direct Part Mark Quality Guideline GS1 DataBar (Composite) Pharmacode Code 93 NOTE: Symbologies on this page are not shown to scale and are not intended for testing purposes. Micro PDF417 Interleaved 2 of 5 UPC JAN/EAN 2D SYMBOLOGIES Data Matrix QR Code Aztec Code DotCode Note: symbologies are not to scale. DIRECT PART MARKS Direct part marks (DPM) are typically 2D Data Matrix symbols permanently marked by such methods as dot peen or laser / chemical etch onto substrates including metal, plastic, rubber or glass. OMRON Microscan offers a comprehensive family of readers and verifiers with illumination and decode algorithms specifically designed for difficult direct part marks. Dot peen on metal Laser etch on metal Inkjet on ABS plastic Thermal print on foil