Insert Magnetic/IC Card Reader 3S4YR-SGR Compact Insert Reader with Magnetic and IC Card Interface n Ideally suited for applications using hybrid magnetic stripe and IC cards (such as EMV) n Supports both ISO and CP8 chip contact locations n Red and green LEDs for operation indicator n Solenoid-controlled IC card locking mechanism n Configurations available to read on card push or pull n RS-232C-interface with embedded EMV support, available early 1997 Ordering Information Magnetic Tracks Supported (R, R/W) Mag Read 1 2 3 Center JIS II IC Contact Direction Solenoid Interface Color Part Number J-type (ISO) Yes TTL Black 3S4YR-SGR0J X-type (ISO+CP8) Yes TTL Black 3S4YR-SGR0X R R R J-type (ISO) Push Yes TTL Black 3S4YR-SGR1J R R R X-type (ISO+CP8) Push Yes TTL Black 3S4YR-SGR1X R R R Push/pull No TTL Black 3S4YR-SGR1N R J type (ISO) Push Yes TTL Black 3S4YR-SGR3J R X type (ISO+CP8) Push Yes TTL Black 3S4YR-SGR3X R Push/pull No TTL Black 3S4YR-SGR3N R J type (ISO) Push Yes TTL Black 3S4YR-SGR4J R X type (ISO+CP8) Push Yes TTL Black 3S4YR-SGR4X R Push/pull No TTL Black 3S4YR-SGR4N R J type (ISO) Push Yes TTL Black 3S4YR-SGR5J R X type (ISO+CP8) Push Yes TTL Black 3S4YR-SGR5X R Push/pull No TTL Black 3S4YR-SGR5N R R J type (ISO) Push Yes TTL Black 3S4YR-SGR6J R R X type (ISO+CP8) Push Yes TTL Black 3S4YR-SGR6X R R Push/pull No TTL Black 3S4YR-SGR6N R R J type (ISO) Push Yes TTL Black 3S4YR-SGR7J R R X type (ISO+CP8) Push Yes TTL Black 3S4YR-SGR7X R R Push/pull No TTL Black 3S4YR-SGR7N Note: Consult the IC Card Basics section of this catalog for IC contact descriptions. 13S4YR-SGR 3S4YR-SGR n TYPICAL APPLICATIONS Remote Terminals for Computers Credit Card Readers ID Card Checkers Electronic Locks Automatic Gate Machines POS Terminals ATMs Gas Pump Control Vending Machines Pre-paid Systems Kiosks Specifications Part number 3S4YR-SGRq N 3S4YR-SGRq J, X Recommended card type ISO 7810 - 7813, 7816/1-2 Service life Mag head 300,000 passes (preliminary) IC contact 500,000 passes (preliminary) Operating power supply 5 VDC 5% Current consumption 2.5 A max. Mounting location Indoors away from wind, rain, sunlight, and dust Ambient temperature 0 to 45C (32 to 113F) Ambient humidity Operation 30% to 85% RH without condensation and frost formation 2 Vibration 10-150 Hz, single vibration width of 0.15 mm or on acceleration of 2 G (19.6 m/s ), whichever is smaller 2 Shock 20 G (196 m/s ) in X, Y, and Z directions, respectively Dimensions 126L x 76W x 25H 126L x 76W x 30H mm (4.96L x 2.99W x 0.98H in) (4.96L x 2.99W x 1.18H in) Weight Approx. 100 g (3.5 oz) Engineering Data n I/O INFORMATION 5 V Output signal levels V = 0.4 V at 5 mA OL V = 2.8 at 0.1 mA OH GND 2 2