AG Series
Single Phase EMI Filters
These series range of General Purpose filters
are designed to suppress undesirable electri-
cal disturbances in Power Lines. They limit
the amplitude of interfering voltages on AC
power lines and prevent them from propagat-
ing into or out of the filtered equipment.
FeA tureS
SerieS SpeciFicA tionS
Rated Current up to 100A
Rated Leakage
Medical Version available
current current (mA) Termination Weight
High Conducted attenuation per formance
Part No. @40C @250VAC/50Hz Tab Screw (kg)
Chassis mounting
AG-001 1A 0.34 6.3 x 0.8 0.06
AG-002 2A 0.34 6.3 x 0.8 0.06
ApplicA tionS
AG-003 3A 0.34 6.3 x 0.8 0.06
AG-006 6A 0.34 6.3 x 0.8 0.06
Power Systems
AG-010 10A 0.34 6.3 x 0.8 0.06
Electronic Equipment
AG-015 15A 0.34 6.3 x 0.8 0.125
Frequency convertors
AG-016 16A 0.34 6.3 x 0.8 0.125
AG-020 20A 0.34 6.3 x 0.8 0.260
Stepper motor drives
AG-025 25A 0.73 M5 0.6
UPS/Inverters
AG-030 30A 0.73 M5 0.6
AG-035 35A 0.73 M5 0.6
AG-040 40A 0.73 M5 0.6
AG-050 50A 0.73 M6 1
AG-060 60A* 0.73 M6 1
AG-075 75A* 0.73 M8 2
AG-080 80A* 0.73 M8 2
AG-100 100A* 0.73 M10 2
*Not covered under CSA
chArActeriSticS
Max. Cont. Oper. Voltage 250VAC
Operating Frequency 50/60Hz
Current ratings 1A to 100A @40C
High Potential test voltage L to G 2120Vdc for 1 Minute; L to L 1414Vdc for 1 Minute
Design Corresponding to UL 60939-3, CSA 22.2 No.8-13 and IEC 60939
Overload Capability 135% of Rated current for 15 minutes
Flammability corresponding to UL 94 V-0
Temperature range -25C to +85C
Climatic Category 25/85/21
Recommended Torque (Nm) M5: 1.0-2.0; M6: 1.25 2.5; M8: 2.5-5; M10: 3.5-7
(continued)
1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info@ohmite.com 1AG Series
Single Phase EMI Filters
circuit diAGrAm
L
L
L'
Cy
L L
Cx
E E
I O
R
N A
E D
Cy
N'
N
inSertion loSS
-10 -10
-20 -20
-30 -30
-40 -40
-50 -50
-60 -60
1A 10A
-70 -70
2A 15/16A
3A 20A
-80 -80
6A 25A
-90 -90
Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz
-10 -10
-20 -20
-30 -30
-40 -40
-50 -50
-60 -60
30A 60A
-70 -70
35A 75A
40A 80A
-80 -80
50A 100A
-90 -90
Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz
(continued)
2 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info@ohmite.com