56F8013/56F8011 Data Sheet Technical Data 56F8000 16-bit Digital Signal Controllers MC56F8013 Rev. 12 05/2008 freescale.com Document Revision History Version History Description of Change Rev. 0 Initial release. Rev. 1 Updates to Part 10, Specifications, Table 10-1, added maximum clamp current, per pin Table 10-12, clarified variation over temperature table and graph Table 10-16, added LIN slave timing Rev. 2 Added alternate pins to Figure 11-1 and Table 11-1. Rev. 3 Corrected ADC offering on page 3, clarified Section 1.4.1, corrected bit selects in Timer Channel 3 Input (TC3 INP) bit 9, Section 6.3.1.7, and simplified notes in Table 10-9. Rev. 4 Added clarification on sync inputs in Section 1.4.1, added voltage difference specification to Table 10-1 and Table 10-4, deleted formula for Ambient Operating Temperature in Table 10-4, also a note for pin group 3 to Table 10-1, corrected Table 8-1, error in Port C peripheral function configuration, removed text from notes in Table 10-9 that referred to multiple flash blocks - this family has one flash block. Added RoHs and pb-free language to back cover. Rev. 5 Updates to Section 10 Table 10-5, corrected max values for ADC Input Current High and Low corrected typ value for pull-up disabled Digital Input Current Low (a) Table 10-6, corrected typ and added max values for Standby > Stop and Powerdown modes Table 10-7, corrected min value for Low-Voltage Interrupt for 3.3V Table 10-11, corrected typ and max values and units for PLL lock time Table 10-12, corrected typ values for Relaxation Oscillator output frequency and variation over temperature (also increased temp range to 150 degreesC) and added variation over temperature from 0105 degreesC Updated Figure 10-5 Table 10-19, updated max values for Integral Non-Linearity full input signal range, Negative Differential Non-Linearity, ADC internal clock, Offset Voltage Internal Ref, Gain Error and Offset Voltage External Ref updated typ values for Negative Differential Non-Linearity, Offset Voltage Internal Ref, Gain Error and Offset Voltage External Ref added new min values and corrected typ values for Signal-to-noise ratio, Total Harmonic Distortion, Spurious Free Dynamic Range, Signal-to-noise plus distortion, Effective Number of Bits Rev. 6 Added details to Section 1. Clarified language in State During Reset column in Table 2-3 corrected flash data retention temperature in Table 10-4 moved input current high/low Table 10-19 clarified title toTable 10-19 and location of footnotes in Table 10-5 reorganized of Figure 10-1. Rev. 7 Added information on automotive device for 56F8013. Added information on 56F8011device edited to indicate differences in 56F8013 and 56F8011 devices. Updated values for V and V in Table 10-7. EI3.3 EI2.5 Deleted values for input and output voltage in Table 10-8. Added row for MC56F8013MFAE in Table 10-12. 56F8013/56F8011 Data Sheet, Rev. 12 2 Freescale Semiconductor