FRDM- STBC- SA9500 Get Started Download tools and documentation under Jump-Start Your Design at freescale.com/ sensortoolbox Quick Reference Card 3-Axis Sensor Toolbox Development Board FXLC95000CL motion-sensing platform integrates a 3-axis MEMS accelerometer with a 32-bit MCU FREESCALE FREEDOM PLATFORM Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. For more information, FRDM- 2015 Freescale Semiconductor, Inc. visit freescale.com/ STBC- FRDMSTBCSA9500QRC REV 1 920-28959 REV A sensortoolbox SA9500 FRDM-STBC-SA9500FXLC95000CL motion-sensing platform integrating Verify package contents: 1 a 3-axis MEMS accelerometer and a 32-bit MCU FRDM-STBC-SA9500 24 LGA (3 mm x 5 mm x 1 mm) development board Connect the FRDM-STBC-SA9500 2 6 I2C SCL1 development board to a Freescale 5 I2C SDA1 Freedom development board, 4 RST GPIO INT I 3 such as the FRDM-K22F (or any 3 BKGD Arduino R3 compatible board). 2 GPIO13 GPIO12 5 Refer to the Freescale Freedom 1 INT 0 GPIO7 6 development board Quick Start GPIO6 8 Guide for driver information. 7 GND PDB 8 1 6 GND Plug one end of a USB cable into 3 the SDA port on the assembly. S SSB IO3 3 4 VDD S SPI MOSI 4 Plug the other end of the cable into 3 RST MCU S SPI SDO 5 the USB port on the computer. 2 VDD S SPI CLK 6 GND 7 4 Download and install the latest Sensor Toolbox software at: I2C SDA0 9 freescale.com/sensortoolbox I2C SCL0 10 Start the Sensor Toolbox software. 5 Through hole pins (18 places) Test points (18 places) On/Off switch Get to Know the FRDM-STBC-SA9500 Learn more at freescale.com/sensortoolbox