GTWX101VHA00P RoHS Compliant TFT LCD Module with Metallized Projective Capacitive Touch Panel (FLETAS touch panel) Specification Model: GTWX101VHA00P Specification No: DS-2079-0000-01 Date of Issue: October 9, 2019 (00) Revision: December 18, 2019 (01) Published by NORITAKE ITRON Corp. / Japan GTWX101VHA00P Notice for the Cautious Handling of LCD Modules Handling and Usage Precautions: Please carefully follow the appropriate product application notes and operation standards for proper usage, safe handling, and maximum performance. Construction Electrostatic Charge The FLETAS touch panel is made of glass. Since we are using semiconductor products, When using this product, please be sure to please pay attention to the electrostatic install a protective overlay such as cover breakdown during handling and transportation. glass, acrylic plate, etc. (If it is judged that the product is defective due Please handle the FLETAS touch panel very to electrostatic destruction during its return to our company, it may be repaired for a fee.) carefully as it may crack if it is pressed with excessive force. Power If this product is bent or twisted, it may cause the breakage of parts on the product board. Please use a fully stabilized power supply. Please handle it very carefully without If the poweSr supplys voltage is outside of the bending or twisting. products rated supply voltage, the operation Please do not hold the FPC or other cables on of the power supply circuit may become this product as it may disconnect vital unstable. components. In-rush current flows when turning the power on. Please use a power supply that can The end faces of the FLETAS touch panel are withstand more than twice the normal current. not polished. Please handle it very carefully to avoid injury. As a safety measure, we recommend using a The FLETAS touch panel is made of glass. power supply with overcurrent protection and a fuse. It may be damaged by falling / impact / excessive vibration. In the unlikely event that Please confirm that the power supply voltage the glass shatters, please handle the glass is within the rating of the connector. fragments very carefully to avoid injury. Please use a power cable with the appropriate The LCD panel generates heat. Please thickness and length. provide clearance for heat dissipation between this product and its enclosure. Also, Interface if a structure has electronic parts that are densely collected near this product, we Please use an interface cable that has a recommend that it be cooled with a fan or length that has been thoroughly verified. something similar. Implementation Cable Connection When installing this product, please make Please do not remove the power cable and sure that the on-board electronic components signal cable if the product is in an energized and FPC do not touch the metal chassis. It state. It may cause damage to the power may cause the product to malfunction. supply circuit and/or the I/O circuit of this If you need to make the product drip-proof, product. please use waterproof measures for products As a rule of thumb, please do not input any by using rubber etc. signals while the product is not receiving Please handle the product carefully when you adequate power. It may cause damage to the take it out from the case and when you install input/ output circuit. the product, since it is a precision part. When plugging-in or unplugging the cable for this product, please do not apply excessive force, such as pulling the cable. Please plug-in or unplug in a straight direction (alignment) with the terminal, without bending or twisting forces. If it is not properly plugged-in or unplugged, damage may occur to the cable or connector. Please avoid sudden bending of the cable from the base of the insert connector part. It may cause damage to the cable or disconnection of the connector. If loads are expected on connectors and cables, please fix cables etc. -2-