Product Information

MM8030-2610RK0

MM8030-2610RK0 electronic component of Murata

Datasheet
Murata Electronics RF Connectors Coaxial Connectors 250Vrms 0.07ohms 11GHZ

Manufacturer: Murata
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (AUD)

5: AUD 0.1373 ( AUD 0.15 Inc GST) ea
Line Total: AUD 0.6865 ( AUD 0.76 Inc GST)

71692 - Global Stock
Ships to you between
Thu. 18 Jul to Tue. 23 Jul
MOQ: 5  Multiples: 5
Pack Size: 5
Availability Price Quantity
321 - Global Stock


Ships to you between Thu. 11 Jul to Wed. 17 Jul

MOQ : 331
Multiples : 1
331 : AUD 0.1204

71692 - Global Stock


Ships to you between
Thu. 18 Jul to Tue. 23 Jul

MOQ : 5
Multiples : 5
5 : AUD 0.1373
50 : AUD 0.1109
150 : AUD 0.0976
500 : AUD 0.0876
2500 : AUD 0.0739
5000 : AUD 0.07

52606 - Global Stock


Ships to you between Wed. 17 Jul to Fri. 19 Jul

MOQ : 1
Multiples : 1
1 : AUD 0.2689
10 : AUD 0.1946
100 : AUD 0.1592
500 : AUD 0.1539
1000 : AUD 0.1292
2500 : AUD 0.1203
10000 : AUD 0.1044
20000 : AUD 0.1044
50000 : AUD 0.1026

321 - Global Stock


Ships to you between Thu. 11 Jul to Wed. 17 Jul

MOQ : 331
Multiples : 1
331 : AUD 0.1204

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
RF Series
Gender
Impedance
Maximum Frequency
Termination Style
Polarity
Orientation
Body Material
Contact Plating
Operating Temperature Range
Packaging
Series
Voltage Rating
Brand
Insulation Resistance
Factory Pack Quantity :
Cnhts
Hts Code
Maximum Operating Temperature
Minimum Operating Temperature
Mxhts
Product Type
Subcategory
Taric
Category
Brand Category
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.

Preliminary Specification of COAXIAL CONNECTOR Written by : A. Takamatsu Preliminary SPEC No. : NMM04-PV0039 Checked by : T. Kuriyama Part Number : MM8030-2610B/RJ3/RK0 Date : 25/Nov./2010 SPECIFICATION 1. PART NUMBER Part Number Packaging Quantity Remarks MM8030-2610B Bulk Package MM8030-2610RJ3 178mm dia. Reel 3000pcs/reel ESD protection MM8030-2610RK0 330mm dia. Reel 10000pcs/reel ESD protection 2. MECHANICAL 2.1 IN Signal in OUT Probe GROUND Signal in Signal out 2 Dia. 1.35 Probe Signal out Signal in 0.1 1.9 Circuit diagram 1 Scale: Free Tolerances Unless Otherwise Specified: +/-0.2 Unit: mm 0.15 +0.2/-0.1 0.18 +0.2/-0.1 FIGURE1. Construction 3. RATING : Item Specification Voltage Rating 250V r.m.s. maximum Nominal Frequency Range DC to 11GHz 50 Nominal Impedance Power Rating 2Wmax (at 2GHz) Temperature Rating -40 to +85 Insulation Resistance 500 M minimum No evidence of break down in Withstanding Voltage AC300+/-20Vr.m.s, 1minute 70mmax. Initial Contact Resistance (without conductor resistance) Voltage Standing Wave Ratio (V.S.W.R.) 1.2 max. (DC to 3GHz) 1.3 max. (3GHz to 6GHz) 1.5max. (6GHz to 11GHz) Insertion Loss 0.1dBmax. (DC to 3GHz) 0.2dBmax.(3GHz to 6GHz) 0.5dBmax. (6GHz to 11GHz) Isolation 20dBmin.(DC to 3GHz) 15dBmin.(3GHz to 6GHz) 10dBmin. (6GHz to 11GHz) Durability 100 cycles 1/3 Dia. 0.5 1 0.38 0.25 2 0.45 1.9 0.9 +/-0.1 Preliminary Specification of COAXIAL CONNECTOR Written by : A. Takamatsu Preliminary SPEC No. : NMM04-PV0039 Checked by : T. Kuriyama Part Number : MM8030-2610B/RJ3/RK0 Date : 25/Nov./2010 4. STANDARD PATTERN DIMENSION 2.3 1.36 0.9 0.5 Land (Gold Plating) (1.5) (1.5) 1.74 Land (Electrode) (Note) The material of PWB is the epoxy resin of glass fabric base. (r=4.8). Thickness is 1.0mm. The solder resist should be printed except for the land pattern on the PWB FIGURE2. Standard pattern dimensions 5. STANDARD STENCIL MASK PATTERN The standard stencil mask pattern is as FIGURE 3.(Thickness is 0.12mm) There is the possibility to have the contact failure by solder shifting into contact point, if the excess solder is used by non standard stencil mask pattern 2.3 1.3 0.35 FIGURE3. Standard stencil mask pattern 2/3 4.5 2.76 1 0.64 1.6 1.1 2.3 1.5 2.3

Tariff Desc

8536.69.10 62 Plugs and sockets for co-axial cables or printed circuits Free

8536.69.90 CONNECTORS, ELECTRICAL, being ANY of the following:
(a) plugs;
(b) sockets;
(c) adaptors
TC 1225594

8536.69.90 PLUG AND SOCKET COMBINATIONS, being ANY of the following:
(a) 2, 3, 4, 6, 9, 12 OR 15 way, rated to 300 V, maximum current of 15 amps;
(b) 2, 3 OR 12 way, single in line pin header;
(c) 1.3mm plug to 2.1mm socket;
(d) 2.5mm plug to 3.5mm socket
TC 9900931

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
TC 9900883

8536.69 JACKS, phono, RCA Type
TC 8438480

8536.69.90 CONNECTORS, electrical, incorporating twist locking mechanism
TC 9703905

8536.70.90 CONNECTORS, OPTICAL Op. 12.06.2007 FIBRE
TC 0708845

8536.69 PLUGS, modular, telephone, to suit RJ 11 sockets and complying with US Standard FCC 68
TC 9203687

8536.90.90 LUGS, being solderable, copper connectors
TC 0613954

8535.90.00 CRIMPING TERMINALS, having bell-mouth OR flared cable entry
TC 9504891

8536.90 HOLDERS, dry cell
TC 8438464

8536.69.90 TC 1440896 POWER POINTS, plastic AND/OR metal, single OR multiple power outlet, with OR without EITHER of the following:
(a) LED (light-emitting diode) night light;
(b) single OR multiple power switches

8536.69 PLUGS/SOCKETS, adaptor being EITHER of the following:
(a) providing for plug or socket configurations used in other countries to connect to Australian standard plugs or sockets;
(b) providing for plug or socket configurations of Australian standard type to connect to plugs or sockets used in other countries
TC 8807068
IPDiA
MU2
MUP
MUR
MURATA
Murata - TOKO
Murata / IPDiA
Murata Electronics
Murata Electronics N
Murata Electronics North America
MURATA MANUFACTURING
Murata Manufacturing Co.
Murata Power Solutio
Murata Power Solutions
Murata Power Solutions Inc
Murata Power Solutions Inc.
Toko
TOKO AMERICA
Toko America Inc.
TOKO, Inc.
TOKYO PARTS INDUSTRIAL
Tokyo Parts Industrial Group

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted