MP3410 1.3A, 550kHz Synchronous Rectified Step-up Converter The Future of Analog IC Technology FEATURES DESCRIPTION Over 90% Efficiency The MP3410 is a highly efficient, synchronous, Output to Input Disconnect at Shutdown Mode fixed frequency, current-mode step-up converter with output to input disconnect, inrush current Internal Synchronous Rectifier limiting and internal soft-start. It includes an error Inrush Current Limiting and Internal Soft-Start amplifier, ramp generator, comparator, N-Channel Internal Compensation switch and P-Channel synchronous rectified 1.3A Typical Switch Current Limit switch (which greatly improves efficiency). The 550kHz Fixed Switching Frequency output disconnect feature allows the output to be Zero Current Shutdown Mode completely isolated from the input in shutdown Thermal Shutdown mode. 5-Pin TSOT-23 Package The 550kHz switching frequency allows for APPLICATIONS smaller external components producing a MP3 Players compact solution for a wide range of load currents. The internal compensation and soft-start Handheld Computers and PDAs minimizes the external component count and Digital Still and Video Cameras limits the inrush current during startup. The External Modems MP3410 has integrated power MOSFET which Small LCD Displays can support up to 6V output and typical 1.3A For MPS green status, please visit MPS website under Quality Assurance. switch current. MPS and The Future of Analog IC Technology are Registered Trademarks of Monolithic Power Systems, Inc. The MP3410 is offered in a thin SOT23-5 package. TYPICAL APPLICATION Efficiency vs Load Current 100 V IN V =3.6V 1.8V - 3.2V IN 90 4 80 SW 3 OUT V OUT V =2.4V IN 70 3.3V 5 400mA EN EN MP3410 60 1 FB 50 GND 2 40 V =5V OUT 30 10 100 1000 LOAD CURRENT (mA) MP3410 Rev. 1.12 www.MonolithicPower.com 1 6/30/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved. EFFICIENCY (%)MP3410 1.3A, 550kHz SYNCHRONOUS RECTIFIED STEP-UP CONVERTER ORDERING INFORMATION Part Number* Package Top Marking Free Air Temperature (T ) A TSOT23-5 MP3410DJ P3 -40C to +85C * For Tape & Reel, add suffix Z (e.g. MP3410DJZ) For RoHS compliant packaging, add suffix LF (e.g. MP3410DJLFZ) PACKAGE REFERENCE TOP VIEW FB 1 5 EN GND 2 OUT 3 4 SW TSOT23-5 (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC All Pins.........................................-0.3V to +6.5V TSOT23-5.............................. 220.... 110.. C/W (2) Continuous Power Dissipation (T = +25C) A Notes: ...........................................................0.47W 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the Storage Temperature............... -65C to +150C maximum junction temperature T(MAX), the junction-to- J (3) ambient thermal resistance , and the ambient temperature JA Recommended Operating Conditions T . The maximum allowable continuous power dissipation at A Supply Voltage V .............................1.8V to 6V any ambient temperature is calculated by P (MAX)=(T (MAX)- D J IN T )/ . Exceeding the maximum allowable power dissipation A JA Output Voltage V ...........................2.5V to 6V OUT will cause excessive die temperature, and the regulator will go Maximum Junction Temp. (T ) .............. +125C J into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on JESD51-7 4-layer board. MP3410 Rev. 1.12 www.MonolithicPower.com 2 6/30/2011 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2011 MPS. All Rights Reserved.