SWDM53xxx00xxxx Fused Single-Mode WDM (1310/1550nm) Molexs 1310/1550 nm fused single-mode wavelength division multiplexers are manufactured using the proven fused biconical taper technology and Oplinks stringent quality procedures. With low insertion loss and flat passband, this device is ideal for combining or separating optical signals in the 1310 and 1550 nm bands. Molex can provide customized designs to meet specialized feature applications. Also, Molex offers modular assemblies that integrate other components to form a full function module or subsystem. L Port 2 Signal Port 1 In Port 4 (terminated for 1x2 configuration) Port 3 Pump Features and Benefits Ultra Low Insertion loss Ultra High Isolation Low Polarization Sensitivity High Directivity Highly Stable & Reliable Bidirectional Applications Telecommunications CATV Subscriber Loop Local Area Networks Laboratory R&D 46360 Fremont Blvd Fremont CA 94538 USA Tel: 510-933-7200 Email: uniAMEFRCOplinksales molex.com Website: www.molex.com S0166. Rev. 02. 2015-03-17 Page 1 of 2 Molex SWDM53xxx00xxxx Fused Single-Mode WDM (1310/1550nm) Specifications SWDM53 Standard High Isolation Unit P A P A Grade (P=Premium, A=Grade A) Operating Wavelength 1295 ~ 1325 / 1528 ~ 1565 nm 1,2 < 0.3 < 0.5 < 0.7 < 1.0 dB Insertion Loss < 0.15 < 0.20 < 0.15 < 0.20 dB Wavelength Dependent Loss Temperature Dependent Loss < 0.15 < 0.20 < 0.15 < 0.20 dB Isolation > 17 > 16 > 34 > 30 dB < 0.1 < 0.2 Polarization Dependent Loss dB > 55 Directivity dB 500 Maximum Power Handling mW o Operating Temperature -10 to +70 C o Storage Temperature -40 to +85 C Fiber Type Corning SMF-28 or equivalent P1: 250m Bare Fiber () 3.00.2 x (L) 54.01 P2: 900m loose tube () 3.00.2 x (L) 60.01 Package mm P3: 3mm cable (L)96.00.2 x (W)12.00.2 x (H)6.40.2 Dimension * P4: 900m Loose Tube or 3mm (L)100.00.2 x (W)80.00.2 x (H)7.00.2 Cable(High Isolation only) Ordering Information 5 3 0 0 SWDM Grade Fiber Length*** Connector Type Premium Grade = P 0.5 Meter = H None = 1 Wavelength A Grade = A 1.0 Meter = 1 FC/PC = 2 1550/1310nm=53 1.5 Meters = 5 FC/SPC = 3 Type 2.0 Meters = 2 FC/APC = 4 Standard=S SC/PC = 5 High Isolation = H* (P4 only) SC/SPC = 6 SC/APC = 7 ST = 8 Configuration Package & Fiber Type LC/PC = 9 1x2= 1 P1+ 250m bare fiber = 11 MU = A 2x2= 2** P2+ 900m loose tube = 22 LC/APC = B P3+ 3mm cable = 33 P4+ 900m loose tube = 42 P4+ 3mm cable = 43 * Must be P4 package ** Not available for high isolation model *** 1 meter is standard. The lead time for special fiber length will be longer. The tolerance of fiber length is +/- 0.1m. (For connector option only, for without connector, just keep the length as minimum) 46360 Fremont Blvd Fremont CA 94538 USA Tel: 510-933-7200 Email: uniAMEFRCOplinksales molex.com Website: www.molex.com S0166. Rev. 02. 2015-03-17 Page 2 of 2 Molex