MIKROE-1208

100-pin TQFP PF MCU CARD 2 with dsPIC33FJ256GP710A v7Card information The PF MCU CARD 2 is shown on Figure 1. It contains dsPIC33FJ256GP710A microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device. dsPIC33FJ256GP710A has 40 MIPS CPU speed, 256K bytes of program 1 memory (flash), 30K bytes of data memory. It has 85 General purpose I/O pins, 9 16-bit timers, 2 ADC (32 ch), 2 UARTs, internal 7.37 MHz and 512 kHz oscillators, 2 I2C, 2 SPI and 2 CAN controllers. It also contains programming and debugging interface. 8MHz crystal oscillator. We carefully chose the most convenient crystal 2 value that provides clock frequency which can be used directly, or with the PLL multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz crystal oscillator which provides external clock waveform for RTCC module. 1 2 Figure 1: MCU card with dsPIC33FJ256GP710A v7 page 2