2N6352 and 2N6353 Qualified Levels: JAN, JANTX, and NPN Darlington Power Silicon Transistor Available on JANTXV commercial Qualified per MIL-PRF-19500/472 versions DESCRIPTION This high speed NPN transistor is military qualified up to the JANTXV level. Important: For the latest information, visit our website 2N6352 and 2N6353 MECHANICAL and PACKAGING CASE: Industry standard TO-213AA (3-pin TO-66), hermetically sealed FINISH: Solder dipped tin-lead over nickel plated alloy 52 or RoHS compliant matte-tin plating (on commercial grade only). Solderable per MIL-STD-750 method 2026. POLARITY: NPN (see schematic) MOUNTING HARDWARE: Consult factory for optional insulator and sheet metal screws WEIGHT: Approximately 6 grams See package dimensions on last page. PART NOMENCLATURE JAN 2N6352 (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS Compliant (available JANTX = JANTX Level on commercial grade only) JANTXV = JANTXV Level Blank = non-RoHS Compliant Blank = Commercial JEDEC type number (see Electrical Characteristics table) SYMBOLS & DEFINITIONS Symbol Definition Base current: The value of the dc current into the base terminal. I B Collector current: The value of the dc current into the collector terminal. I C Emitter current: The value of the dc current into the emitter terminal. I E T Case temperature: The temperature measured at a specified location on the case of a device. C Collector-base voltage: The dc voltage between the collector and the base. V CB Collector-base voltage, base open: The voltage between the collector and base terminals when the emitter terminal is V CBO open-circuited. Collector-supply voltage: The supply voltage applied to a circuit connected to the collector. V CC Collector-emitter voltage: The dc voltage between the collector and the emitter. V CE Collector-emitter voltage, base open: The voltage between the collector and the emitter terminals when the base V CEO terminal is open-circuited. V Emitter-base voltage: The dc voltage between the emitter and the base EB Emitter-base voltage, collector open: The voltage between the emitter and base terminals with the collector terminal V EBO open-circuited. T4-LDS-0315, Rev. 1 (11/20/13) 2013 Microsemi Corporation Page 2 of 7