ETC1-1-13 E-Series Transformer, RF 1:1 Transmission Line Rev. V12 4.5 - 3000 MHz Functional Schematic Features Surface Mount 1:1 impedance ratio Available on Tape and Reel RoHS Compliant and Pb Free 260C Reflow Compatible Available on Tape and Reel Description The ETC1-1-13 is a 1:1 transmission line transformer in a low cost surface mount package. Ideally suited for high volume cellular and wireless Pin Configuration applications. Pin No. Function 1 Primary Dot 2 Primary 3 Secondary 4 Not Connected (ground) 5 Secondary Dot Electrical Specifications: Freq. = 4.5 - 3000 MHz, T = 25C, Z = 50 , P = 0 dBm A 0 IN Parameter Conditions Units Min. Typ. Max. 4.5 - 1000 MHz 0.32 1.0 Insertion Loss 1000 - 2000 MHz dB - - 2.0 (Ref. level -3 dB) 2000 - 3000 MHz - 3.5 Amplitude Balance - dB - - 1.0 Phase Balance - degree - - 20 (Ref. value 0) Ordering Information Recommended Maximum Ratings Part Number Description Parameter Units ETC1-1-13TR 2000 piece reel Input RF Power 250 mW DC Current 30 mA Operating Temperature -55C to +85C 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: ETC1-1-13 E-Series Transformer, RF 1:1 Transmission Line Rev. V12 4.5 - 3000 MHz Typical Performance Curves: T = 25C, Z = 50 , P = 0 dBm A 0 IN Insertion Loss Input Impedance Phase Unbalance Amplitude Unbalance Full temperature plots available on request 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: