Teccor brand Thyristors Multipulse SIDACs RoHS Kxxx1G Series Description The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits as well as High Pressure Sodium lamp ignition circuits for outdoor street and area lighting. This robust solid state switch is designed to handle lamp igniter applications requiring operation at ambient temperatures up to 90C where igniter circuit components can raise SIDAC junction temperature up to 125C, especially when the lamp element is removed or ruptured. Its excellent commutation time (t ) makes this robust product best COMM suited for producing multiple pulses in each half cycle of 50/60 Hz line volt age. The Multipulse SIDAC is offered in DO-15 axial leaded package. Kxxx1G SIDAC has a repetitive off-st ate blocking volt age (V ) of 180V to 270V minimum depending actual device DRM type. Blocking capability is ensured by glass passivated Schematic Symbol junctions for best reliability. Package is epoxy encapsulation with tin-plated copper alloy leads. Features AC circuit oriented RoHS Compliant T riggering Volt age of 20 0 to 380V Applications Typical application circuit presented in Figure 10 of this dat a sheet (Typical Met al Halide Ignitor Circuit). Electrical Specifications Symbol Parameters Test Conditions Min Max Unit K2201G 200 230 K2401G 220 250 V Breakover/Trigger Voltage V BO K2501G 240 280 K3601G 340 380 K2201G 180 K2401G 190 V Repetitive Peak Off-St ate Volt age V DRM K2501G 200 K3601G 270 50/60Hz I On-St ate RMS Current, T < 125C 1 A T(RMS) J Sine Wave 50/60Hz I Dynamic Holding Current, R=10 0 120 TYP mA H Sine Wave (V V ) 50/60Hz BO S R Switching Resistance, R = 100 S S Sine Wave (I I ) S BO See test circuit and t Commutation Time T < 125C 100 sec COMM J waveform in Figure 9 50/60Hz I Breakover Current 10 uA BO Sine Wave 60Hz 20.0 I Non-repetitive 1 cycle On-St ate peak value A TSM 50Hz 16.7 di/dt Critical Rate of Rise of On-St ate Current 150 A/sec dv/dt Critical Rate of Rise of Off-St ate Volt age 1500 V/sec T Storage Temperature Range -40 +125 C S T Max Operating Junction Temperature -40 +125 C J R Thermal Resistance Junction to lead 18 C/W JL 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/25/16 Teccor brand Thyristors Multipulse SIDACs Figure 2: Maximum Allowable Lead/Tab Temperature Figure 1: Char acteristics vs. On-State Current +I 130 I T 120 I H R 110 S 100 I S 90 I BO I DRM -V +V 80 V BO 70 V V T S (V - V ) BO S R = V 60 S DRM (I - I ) S BO 50 0 1.0 1.5 2.0 RMS On-State Current (Amps) -I Figure 3: Power Dissipation (Typical) Figure 4: V Change BO vs. On-State Current vs. Junction Temperature 10.0 4.0 3.5 5.0 3.0 2.5 0.0 2.0 1.5 -5.0 1.0 0.5 -10.0 0.0 -40 -25 -105 20 35 50 65 80 95 110125 0.0 0.5 1.0 1.5 RMS On-State Current (Amps) Junction Temperature (C) Figure 5: Pulse On-State Figure 6: Maximum Allo wable Ambient Temperature Current Rating vs. On-State Current 1000 140 di/dt limit I TM CURRENT WAVEFORM: Sinusoidal - 60Hz LOAD: Resistive or Inductive 120 t FREE AIR RATING O f = 5Hz 1/f 100 100 T =125C J 60 Hz 1KHz 80 5KHz 10 60 40 25 1 20 110 100 1000 0.00.2 0.40.6 0.81.0 Pulse Base Width (t )-s O RMS On-State Current I - Amps T(RMS) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/25/16 Average P (Watts) D Repetitive Peak On-State Current (I )-Amps TRM Normalized Percentage of V Maximum Allowable Ambient Temperature BO Maximum Allowable Lead (T ) - C Change (%) A Temperature (C)