Flashers and Tower Lighting Controls Flashers FS300 SERIES Description The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All solid-state construction means reliability and long life. The FS300 Series offers a factory fixed ash rate of 75 FPM or mafl y be ordered with a fixed, custom ash rate ranging from 60 to 1fl 50 FPM. Operation Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2. Wiring Diagram Features & Benefits FEATURES BENEFITS No moving parts to arc and wear out over time and Totally solid state encapsulated to protect against shock, vibration, and encapsulated and humidity High immunity to line Designed specifically for moving V = Voltage noise and transients vehicle applications L = Load High surge current capability Direct operation of incandescent lamp loads (10 times steady state) Two terminal Provides quick and easy installation for new or series connection existing applications Accessories P1023-6 Mounting bracket The 90 orientation of mounting slots makes installation/removal of modules quick and easy. P1015-64 (AWG 14/16) Female Quick Connect Ordering Information These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide MAXIMUM MODEL INPUT CURRENT LOAD strain relief. FS312 12VDC 20% 2.5A P1015-18 Quick Connect to Screw Adapter Screw adapter terminal designed for use with FS324 24VDC 20% 1.5A all modules with 0.25 in. (6.35 mm) male quick If you dont find the part you need, call us for a custom product 800-843-8848 connect terminals. C103PM (AL) DIN Rail 35 mm aluminum DIN rail available in a 36 in. (91.4 cm) length. Specifications P1023-20 DIN Rail Adapter Allows module to be mounted on a 35 mm DIN type rail with two 10 screws. 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/fs300Flashers and Tower Lighting Controls Flashers FS300 SERIES Specifications Flasher Function Diagram Technical Data V = Voltage FLASHER (OFF FIRST) Operation OFF/ON recycling solid-state flasher R = Reset (continuous duty) L = Load Flash Rate Fixed at 75 FPM 10% T1 = ON Time Custom Flash Rates 60 - 150 FPM T2 = OFF Time ON/OFF Ratio 50% T1 T2 Input Voltage 12, 24, 36, 48, 72, & 110VDC Output Load Type Incandescent or resistive Maximum Load Rating 0.25 - 2.5A steady state Inrush 10 times steady state current Mechanical Mounting Surface mount with one 10 (M5 x 0.8) screw Dimensions H 50.8 mm (2) W 50.8 mm (2) D 30.7 mm (1.21) Termination 0.25 in. (6.35 mm) male quick connect terminals Protection Circuitry Encapsulated Environmental Operating/Storage Temperature -20 to 60C / -40 to 85C Humidity 95% relative, non-condensing Weight 2.2 oz (62 g) 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/fs300