709296001025006

POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 General Information The widespread market adaptation of the AVX STRIPT contact systems continue to drive new product developments. The 70-9296 series of dual beam, boxed contacts provide a simple, yet reliable wire-to-board alternative to full sized 1pc and 2pc connector solutions. Contacts are SMT onto the PCB, then either solid or stranded wires can be stripped to length and inserted into the contact. Contacts are designed with dual beam high force contacts to maximize wire retention. Integral wire guides and stop assures proper positioning of the wire. In this round of product expansion, the 2.5mm has been added to offer a new size when trying to maximize AWG and keep the smallest profile contact available is size critical applications. Additionally, this contact has been designed without a wire stop to facilitate solid pin insertion capabilities for board-to-board and module-to-module applications (see BTB Jumper data sheet for 109296001xxx906). APPLICATIONS FEATURES AND BENEFITS Industrial/Ruggedized Wire-to-Board applications Dual Beam box contact provides maximum mechanical stability and Replace hard soldering of wire to a PCB wire retention Reference Product Specification 201-01-143 Tape and reel packaged for automated SMT placement Reference Application Notes 201-01-150 Staged current rating based on AWG, maximum is 10A (12AWG) Linear Board-to-Board capabilities with 109296001xxx906 jumpers 2.5mm w/o wire stop allows for variable PCB mating tolerances in linear BTB applications ELECTRICAL ENVIRONMENTAL MECHANICAL Voltage Rating: 300V Operating Temperature: Contact Material: Phosphor Bronze Based on placement distance -40C to +125C Contact Plating: Pure Tin Current Rating: See Matrix Below Durability 5 Cycles HOW TO ORDER 70 9296 001 0XX 0X6 Wire Gauge Size Plating & Other Options Prefix Series Number of Ways 001= 1 70 = Contact UL Code Wire Stop Variations Plating Ma x Code Contact Size Wire Gauge Approved 006 With wire stop Pure tin all Insulation E90723 over 016* Without wire stop 22-26 AWG 1.3mm *2mm, 2.5mm, and 3mm contact only 017 1.7mm Contact Yes Solid or Stranded (See page 85) 22-28 AWG 1.5mm 002 2mm Contact Yes Solid or Stranded (See page 85) 18-26 AWG Max 2mm 025 2.5mm Contact Yes Solid or Standed (See page 85) 18-26 AWG 003 3mm Contact 2.5mm Yes Solid or Stranded 12-20 AWG 004 4mm Contact 3.4mm Yes Solid or Stranded CURRENT RATING Size Part Number 12AWG 14AWG 16AWG 18AWG 20AWG 22AWG 24AWG 26AWG 28AWG 4mm 709296001004006 20A 16A 14A 12A 10A 3mm 7092960010030x6 15A 14A 10A 9A 7A 2.5mm 7092960010250x6 14A 12A 11A 9A 7A 2mm 709296001002006 11A 9A 7A 6A 1.7mm 709296001017006 11A 9A 7A 6A The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 84 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 102820POKE-HOME: SINGLE HORIZONTAL CONTACT 12-28 AWG: 70-9296 1.7mm 70-9296-001-017-006 1.7MM POKE HOME CONTACT NOTES: 1. FOR FURTHER INFORMATION REFER TO ELCO SPECIFICATION 201-01-143 AND APPLICATION NOTES 201-01-150. 2. MATERIAL: TIN PLATED PHOSPHOR BRONZE. 3. PACKING IN TAPE AND REEL, 4000 PIECES PER REEL. 4. FOR WIRE TRIM DETAILS REFER TO PAGE 91. 5. AREA AVAILABLE FOR PICK AND PLACE. 6. UL REFERENCE 90723. 7. GENERAL TOLERANCE 0.10. SUGGESTED PCB LAYOUT PACKING DETAILS UNREELING DIRECTION The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 85 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 072820