Disc Ceramic Capacitors General Specifications - Class II General Purpose DIELECTRIC - CLASS II These ceramic capacitors have a high dielectric constant, what makes possible high capacitance values in reduced dimensions, however temperature coefficient and loss factor are greater than Class I. Typical applications are decoupling and by pass. Meets IEC 384-9 (1988). HOW TO ORDER 5M K 101 K A B A A Product Code Voltage Capacitance Tolerance Lead Capacitor Finishing Packaging Forming Diameter 100V / 500V PERFORMANCE CHARACTERISTICS CLASS II Voltage Rating 100V ... 500V 1kV ... 5kV Measured at 1.0 kHz 0.3 Vrms / 25C 1.0 kHz 0.3 Vrms / 25C Y5E / Y5F / Y5P 2.5% Y5F 2.5% Dissipation Factor (%) Y5U / Y5V / Z5V 3.0% Y5U / Y5V 3.0% C < 10 pF 0.25 pF, 0.5 pF C < 10 pF 0.25 pF, 0.5 pF R R Tolerance C 10 pF 5%, 10% C 10 pF 5%, 10% R R Insulation V 10 G 500V 10 G R Resistance (IR) Dielectric Strength NOTE: Charging V = 100V Vt = 250V (DC) R 1.5 x V + 500 (DC) R current limited V = 500V Vt = 1250V (DC) R to 50 mA dV/dt test up to 3.0 kV/sec for 5NR 5NS Series Operating -30 ... +85C Phenolic Coated Temperature -30... +85C -30 ... +125C Epoxy Coated Range (C) Climatic 30 / 85 / 21 Phenolic Coated 30 / 085 / 21 Phenolic Coated Category 30 / 85 / 56 Epoxy Coated Note: Damp Heat Steady State: 90... 95% R.H. 40C / 21 days. No voltage to be applied. 11Disc Ceramic Capacitors General Specifications - Class II General Purpose TEMPERATURE COEFFICIENT TYPICAL CURVES 12