T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-7104MD/1SURK1SYKD Hyper Red Super Bright Yellow Features Descriptions z Pre-trimmed leads for pc mounting. z The Hyper Red source color devices are made with z Black case enhances contrast ratio. AlGaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z The Super Bright Yellow device is made with AlGaInP z High reliability life measured in years. (on GaAs substrate) light emitting diode chip. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAK3566 REV NO: V.2A DATE: AUG/11/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102014190 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 400 900 Hyper Red (AlGaInP) Red Diffused 40 *120 *240 L-7104MD/1SURK1SYKD 400 800 Super Bright Yellow (AlGaInP) Yellow Diffused 40 *400 *800 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 645 peak Peak Wavelength nm IF=20mA Super Bright Yellow 590 Hyper Red 630 D 1 Dominant Wavelength nm IF=20mA Super Bright Yellow 590 Hyper Red 28 1/2 Spectral Line Half-width nm IF=20mA Super Bright Yellow 20 Hyper Red 35 C Capacitance pF VF=0V f=1MHz Super Bright Yellow 20 Hyper Red 1.95 2.5 VF 2 Forward Voltage F=20mA V I Super Bright Yellow 2 2.5 Hyper Red 10 IR Reverse Current uA VR = 5V Super Bright Yellow 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Super Bright Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current 1 185 175 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAK3566 REV NO: V.2A DATE: AUG/11/2014 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1102014190