T-1 3/4 (5mm) BI-COLOR RIGHT ANGLE LED INDICATOR Part Number: L-59BL/1GEW-10MAV Green High Efficiency Red Features Descriptions z Pre-trimmed leads for pc board mounting. z The High Efficiency Red source color devices are made z Black case enhances contrast ratio. with Gallium Arsenide Phosphide on Gallium Phosphide z Wide viewing angle. Orange Light Emitting Diode. z High reliability - life measured in years. z The Green source color devices are made with Gallium z Housing UL rating:94V-0. Phosphide Green Light Emitting Diode. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL8909 REV NO: V.2A DATE: MAR/04/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102011026 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 10 20 Green (GaP) *10 *20 L-59BL/1GEW-10MAV White Diffused 60 15 30 High Efficiency Red (GaAsP/GaP) *10 *20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2.Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 565 peak Peak Wavelength nm IF=10mA High Efficiency Red 627 Green 568 D 1 Dominant Wavelength nm IF=10mA High Efficiency Red 617 Green 30 1/2 Spectral Line Half-width nm IF=10mA High Efficiency Red 45 Green 15 C Capacitance pF VF=0V f=1MHz High Efficiency Red 15 Green 2 2.5 VF 2 Forward Voltage F=10mA V I High Efficiency Red 1.9 2.5 Green 10 IR Reverse Current uA VR = 5V High Efficiency Red 10 Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter Green High Efficiency Red Units Power dissipation 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 140 160 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAL8909 REV NO: V.2A DATE: MAR/04/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1102011026