Snap-In Aluminum Electrolytic Capacitors ALC80, +105C Overview Applications The KEMET ALC80 High CV snap-in capacitors offer high Typical applications for the ALC80 capacitor include performance and reliability in a wide range of case sizes inverters, frequency converters, motor drives, motor control, and voltage ratings featuring high ripple currents and UPS systems, smoothing, energy storage, alternative energy, long-life performance. Volumetric efficiency ensures the charging stations, traction, demanding power supplies maximum capacitance capability in a smaller size. (SMPS), welding, and HVAC. Benefits Maximum capacitance capability in a smaller size , I applied) Long life, up to 9,000 hours at +105C (V R R High ripple current Excellent surge voltage capability PET sleeve and Lexan disc are recognized to UL: QMTR2, UL No. E358957 (Other options available upon request) Optimized designs available upon request Part Number System ALC80 A 392 BB 040 Series Termination Capacitance Code (F) Size Code Rated Voltage (VDC) Snap-In type See Termination Table First two digits See Dimension Table 025 = 25 250 = 250 Aluminum Electrolytic represent significant 040 = 40 350 = 350 figures. Third digit 063 = 63 400 = 400 specifies number of 100 = 100 450 = 450 zeros. 200 = 200 500 = 500 Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4082 ALC80 9/2/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSnap-In Aluminum Electrolytic Capacitors ALC80, +105C Performance Characteristics Item Performance Characteristics Capacitance Range 68 240,000 F Rated Voltage 25 500 VDC Operating Temperature 40 to +105C Storage Temperature Range 55 to +105C Capacitance Tolerance 20% at 100 Hz/+20C Rated Voltage and Ripple Current Rated Voltage at +105C D (mm) at +105C (hours) (hours) 25 6,000 10,000 Operational Lifetime 30 7,000 11,000 35 8,000 13,000 40 50 9,000 14,000 40 < V 160 VDC C/C < 20% R End of Life Requirement V > 160 VDC C/C < 15% R ESR < 3X ESR Limit, IL < initial specified limit Shelf Life 2,000 hours at +85C or 30,000 hours at +40C 0 VDC I = 0.003 CV or 6,000 (A, whichever is smaller) Leakage Current C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure Requirements 0.75 mm displacement amplitude or 10 G maximum acceleration. D 40 mm Vibration applied for three directions No leakage of electrolyte 2-hour sessions at 10 500 Hz. or other visible damage. Vibration Test Specifications (Capacitor clamped by body) Deviations in capacitance 0.35 mm displacement amplitude or from initial measurements 5 G maximum acceleration. Vibration must not exceed: C/C < 5% D > 40 mm applied for three directions 0.5-hour sessions at 10 55 Hz. (Capacitor clamped by body) Standards IEC 603844 long life grade 40/105/56 Surge Voltage Voltage (VDC) Condition 25 40 63 100 200 250 350 400 450 500 30s Surge followed by a no load period of 330 seconds, 1,000 cycles 28.75 46 72.5 115 230 288 385 440 495 550 at +105C KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4082 ALC80 9/2/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com