Aluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 25 VDC Overview The KEMET Aluminum Organic Capacitor (AO-CAP) Since there is no liquid electrolyte, the A700 offers long is a solid state aluminum capacitor. The cathode is a operational lifetimes, low ESR, and high operational conductive organic polymer, which results in very low ESR temperatures. The inherent low ESR renders the A700 and improved capacitance retention at high frequency. suitable for high ripple current handling. The small AO-CAPs may be operated at steady state voltages up to package size, high ripple current capability, high operating 100% of rated voltage without the need to de-rate. temperature, low parasistics, and high capacitance makes the A700 ideal for high performance microprocessor, FPGA, and ASIC decoupling designs. Benefits ESR: 4.5 70 m Polymer cathode technology High frequency capacitance retention Non-ignition failure mode 100% accelerated steady state aging 100% surge current tested Volumetric efficiency Self-healing mechanism EIA standard case sizes Applications Typical applications include DC/DC converters, notebook PCs, telecommunications, displays, and industrial applications. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2020 A700 8/18/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comAluminum Organic Capacitor (AO-CAP) A700 Polymer Aluminum, 2 25 VDC K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMETs K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information A 700 V 476 M 006 A T E018 Capacitor Case Capacitance Capacitance Rated Voltage Failure Rate/ Termination Packaging Series ESR Code Class Size Code (pF) Tolerance (VDC) Design Finish (C-Spec) A = 700 = D First two digits M = 20% 002 = 2 A = N/A T = 100% E = ESR Blank = 7 Reel Aluminum Aluminum V represent 2R5 = 2.5 Matte Tin Last three 7280 = 13 Reel Polymer W significant 004 = 4 (Sn)-plated digits specify X fi gures. Third 006 = 6.3 ESR in m digit specifies 008 = 8 (018 = 18 number of 010 = 10 m) zeros. 12R = 12.5 016 = 16 025 = 25 Performance Characteristics Item Performance Characteristics Operating Temperature 55C to 105C/125C (Refer to part number for maximum temperature rating) Rated Capacitance Range 6.8 560 F at 120 Hz/25C Capacitance Tolerance M Tolerance (20%) Rated Voltage Range 2 25 V DF (120 Hz) 6% ESR (100 kHz) Refer to Part Number Electrical Specification Table 4 V Rating: 0.06 CV (A) at rated voltage after 5 minutes > 4 V Rating: 0.04 CV (A) at rated voltage after 5 minutes If there is any concern about leakage current, please perform pre-conditioning to the part following below conditions: Leakage Current * Temperature: 105C maximum * Voltage: Rated Voltage * Series Resistor: 1,000 * Charge Time: 1 hour minimum * Measuring: Discharge the capacitor(s), store them for 4 to 24 hours at room temperature and RH 60% KEMET Electronics Corporation KEMET Tower One East Broward Boulevard T2020 A700 8/18/2020 22 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com