TLE8250X High Speed CAN Transceiver 1 Overview Features Compliant to ISO11898-2: 2003 Wide common mode range for electromagnetic immunity (EMI) Very low electromagnetic emission (EME) Excellent ESD robustness Guaranteed and improved loop delay symmetry to support CAN FD data frames up to 2 MBit/s for Japanese OEMs V input for voltage adaption to the microcontroller supply IO Extended supply range on V and V supply CC IO CAN short circuit proof to ground, battery and V CC TxD time-out function Low CAN bus leakage current in power-down state Overtemperature protection Protected against automotive transients Receive-only mode Green Product (RoHS compliant) AEC Qualified Certified according to latest VeLIO (Vehicle LAN Interoperability & Optimization) test requirements for the Japanese market Applications Engine Control Unit (ECUs) Transmission Control Units (TCUs) Chassis Control Modules Electric Power Steering Description The TLE8250XSJ is a transceiver designed for HS CAN networks in automotive and industrial applications. As an interface between the physical bus layer and the CAN protocol controller, the TLE8250XSJ drives the signals to the bus and protects the microcontroller against interferences generated within the network. Based on the high symmetry of the CANH and CANL signals, the TLE8250XSJ provides a very low level of electromagnetic emission (EME) within a wide frequency range. The TLE8250XSJ fulfills or exceeds the requirements of the ISO11898-2. Data Sheet 1 Rev. 1.0 www.infineon.com/transceiver 2016-07-15TLE8250X High Speed CAN Transceiver Overview The TLE8250XSJ provides a digital supply input V and a receive-only mode. It is designed to fulfill the IO enhanced physical layer requirements for CAN FD and supports data rates up to 2 MBit/s. On the basis of a very low leakage current on the HS CAN bus interface the TLE8250XSJ provides an excellent passive behavior in power-down state. These and other features make the TLE8250XSJ exceptionally suitable for mixed supply HS CAN networks. Based on the Infineon Smart Power Technology SPT, the TLE8250XSJ provides excellent ESD immunity together with a very high electromagnetic immunity (EMI). The TLE8250XSJ and the Infineon SPT technology are AEC qualified and tailored to withstand the harsh conditions of the automotive environment. Two different operating modes, additional fail-safe features like a TxD time-out and the optimized output slew rates on the CANH and CANL signals, make the TLE8250XSJ the ideal choice for large HS CAN networks with high data transmission rates. Type Package Marking TLE8250XSJ PG-DSO-8 8250X Data Sheet 2 Rev. 1.0 2016-07-15