5-V Voltage Regulator TLE 4286 G Features 15 mA output current capability 1 A current consumption in standby mode Low quiescent current consumption 60 A in ON mode Inhibit input Very small SMD-Package PG-SCT-595-5 Wide operation range: 6.2 V to 42 V Wide temperature range: -40 C to 150 C Output protected against short circuit PG-SCT-595-5 Overtemperature protection Green product (RoHS compliant) AEC qualified. Functional Description The TLE 4286 G is a 5-V low-drop fixed voltage regulator in the very small SMD package PG-SCT-595-5. The maximum input voltage is 42 V. The output is able to drive a load of more than 10 mA while it regulates the output voltage within a 4% accuracy. The device can be switched in stand-by mode via an inhibit input which causes the current consumption to drop below 1 A. A temperature protection disables the IC at over temperature. Type Package Marking TLE 4286 G PG-SCT-595-5 A1 Data Sheet 1 Rev. 2.3, 2008-04-21 TLE 4286 G PG-SCT-595-5 INH 1 5 GND GND 2 3 4 Q AEP02253 Figure 1 Pin Configuration (top view) Table 1 Pin Definitions and Functions Pin No. Symbol Function 1INH Inhibit input H for active (V = 5 V) and L for stand-by Q 2GND Ground internally connected to pin 5 3I Input voltage 4Q Output voltage must be blocked by a capacitor C 1 F, ESR 10 to GND Q 5GND Ground internally connected to pin 2 Data Sheet 2 Rev. 2.3, 2008-04-21