LITIX Basic TLD1120EL 1 Channel High-Side Current Source Package PG-SSOP-14 Marking TLD1120 1 Overview Applications Exterior LED lighting applications such as tail/brake light, turn indicator, position light, side marker,... Interior LED lighting applications such as ambient lighting, interior illumination and dash board lighting. VBATT GND ISO-Pulse EN Internal protection circuit supply depending on requirements Thermal Output protection control OUT IN SET Current adjustment TLD1120EL ** For EMI improvement if required Application Diagram with TLD1120EL Data Sheet Rev. 1.2 www.infineon.com 2018-04-26 C =2.2F mod 10k R SET C =4.7nF VS VS GNDS GND 4.7nF** LITIX Basic TLD1120EL Overview Basic Features 1 Channel device with integrated output stage (current source), optimized to drive LEDs with output current up to 360 mA Low current consumption in sleep mode PWM-operation supported via VS- and EN-pin Output current adjustable via external low power resistor and possibility to connect PTC resistor for LED protection during over temperature conditions Reverse polarity protection and overload protection Undervoltage detection Wide temperature range: -40C < T < 150C j PG-SSOP-14 package with exposed heatslug Description The LITIX Basic TLD1120EL is a one channel high side driver IC with integrated output stage. It is designed to control LEDs with a current up to 360 mA. In typical automotive applications the device is capable to drive i.e. 3 red LEDs with a current up to 180 mA, which is limited by thermal cooling aspects. The output current is controlled practically independent of load and supply voltage changes. Table1 Product Summary Parameter Symbol Value Operating voltage range V 5.5 V ... 40 V S(nom) Maximum voltage V 40 V S(max) V OUT(max) Nominal output (load) current I 180 mA when using a supply voltage range of 8 V - 18 V (e.g. OUT(nom) Automotive car battery). Currents up to I possible in OUT(max) applications with low thermal resistance R thJA Maximum output (load) current I 360 mA depending on thermal resistance R OUT(max) thJA 2250 7% Output current accuracy at R = 12 k k SET LT Current consumption in sleep mode I 0.1 A S(sleep,typ) Protective Functions ESD protection Under voltage lock out Over Load protection Over Temperature protection Reverse Polarity protection Data Sheet 2 Rev. 1.2 2018-04-26