Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCYBT-353027-02 EZ-BT WICED Module EZ-BT WICED Module 1 Power Consumption General Description TX average current consumption: 52.5 mA (EDR) at 8 dBm The CYBT-353027-02 is a fully integrated Bluetooth Smart Ready wireless module. The CYBT-353027-02 includes an RX average current consumption: 26.4 mA (EDR) onboard crystal oscillator, passive components, flash memory, Low power mode support and the Cypress CYW2070x silicon device. Deep Sleep: 2.69 A The CYBT-353027-02 supports peripheral functions (ADC, 2 timers), UART, I C, and SPI communication, and a Bluetooth Functional Capabilities audio interface. The CYBT-353027-02 includes a royalty-free BLE stack compatible with Bluetooth 5.0 in a 9.0 9.0 1.75 mm - ADC for audio (12 bits) and DC measurement (10 bits) SMT package. 2 Serial communications interface compatible with I C slaves The CYBT-353027-02 includes 512 KB of onboard serial flash Master Serial Peripheral Interface (SPI) support memory and is designed for standalone operation. The CYBT-353027-02 uses an integrated power amplifier to achieve HCI interface through UART Class I or Class II output power capability. PCM/I2S Audio interface The CYBT-353027-02 is fully qualified by Bluetooth SIG and is targeted at space constrained applications. Programmable output power control Supports extended synchronous connections (eSCO), for Features enhanced voice quality by allowing for retransmission of dropped packets Module Description Bluetooth wideband speech support Module size: 9.00 mm 9.00 mm 1.75 mm Bluetooth 5.0 Qualified Smart Ready module Benefits QDID: D039123 CYBT-353027-02 provides all necessary components required Declaration ID: 109292 to operate BLE and/or BR/EDR communication standards. Certified to FCC, ISED, MIC, and CE regulations Proven hardware design ready to use Castelated solder pad connections for ease-of-use Dual-mode operation eliminates the need for multiple modules 512-KB on-module serial flash memory Cost optimized for applications without space constraints Up to eight GPIOs Nonvolatile memory for self-sufficient operation and Temperature range: 30 C to +85 C Over-the-air updates Cortex -M3 32-bit processor Bluetooth SIG Listed with QDID and Declaration ID Maximum TX output power: Fully certified module eliminates the time needed for design, +12 dBm for Bluetooth Classic development and certification processes +9 dBm for Bluetooth Low Energy WICED Studio provides an easy-to-use integrated design RX Receive Sensitivity: environment (IDE) to configure, develop, and program a Bluetooth application 93.5 dBm for Bluetooth Classic 96.5 dBm for Bluetooth Low Energy Note 1. The values in this section were calculated for a 90% efficient DC-DC at 3 V in HCI mode, and based on a Class I configuration bench-marked at Class II. Lower values are expected for a Class II configuration using an external LPO and corresponding PA configuration. Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-23132 Rev. *D Revised March 6, 2020